SOURCE: 2001 chevy venture oil sending unit
HI..
On a problem with oil pressure sensor leaking.
99% you need to replace the sensor with a new one.
Because if you can see the leak is not for the tread or gasket of the sensor.
If you can disconnect the the wire from the sensor.
and try to start you will see the leak coming from inside on the plastic, where the pins. of the sensor.
OK.. I hope this information work for you.
I work on Cars everyday.
Thank you fo use fixya.
SOURCE: what is a oil sending unit on 99 chevy venture van?
easy to change u just need a special tool for removed on front of motor at right of oil filter its look like a coolant sensor or a little bottle with a connetor removed the connector and take the tool to remove
SOURCE: where is the oil sending unit on a 93 chevy silverado 350 engine
the oil sending unit is located at the back of the motor right below the rotor cap it is about 3 inches long and has a 3 wire plug hooked t it
SOURCE: Where is the oil sending unit located on a 2003 Chevy Tahoe 5.3 engine
its in the block behind intake manifold .
SOURCE: Where is oil sending unit on 2003 Chevy Avalanche
It's at the very back of the block, top-center, under the intake manifold.
371 views
Usually answered in minutes!
×