Question about 1995 Audi A6

2 Answers

My infrared remote does not work. I have an Audi A6 1995

My infrared remote does not work. I bought a new pair of car keys. I have an Audi A6 1995 and in the internet I only have found the procedures for reprogramming the wireless fob, not the IR one. How can I reprogram it?

Posted by on

  • Flavio Fraga Mar 25, 2009

    No. This solution is available in the owner´s manual. It did not work.
    I wonder if there is any device in the car that is not receiving the IR signals... or is just the way to reprogram the alarm that is not being correctly described in the internet...
    Thank you anyway.


×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Do you have memory seats as well? If so follow these steps I am going to refer to the keys as A and B as you have 2 of them
1) Unlock car with key A
2) Turn ignition into ON position with key A and roll down the window
3) Point Key B at IR Sensor and Click twice (perform both clicks under 5 seconds)
4) Turn off ignition and pull Key A out
5) Turn ignition into ON position with Key B
6) Point Key A at IR Sensor and Click once
7) Turn off ignition and Pull Key B out

Key A should be programmed as the Master Seat Program and Key B should be programmed for the Secondary seat program
So when you set your memory seats Key A is for Memory Position 1 and Key B is for memory position 2
if you don't have memory seats then you only have to point the receiver at the sensor and click once. That should just sync the IR Frequency and Codes

Posted on Mar 08, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Please my friend... my e-mail is: turbofort@bol.com.br I need a new pair of keys to my audi a4 1995 with infrared alarm... Where i can bought this keys ?? Please, help me. Thank you, and sorry my english !!!

Posted on Jul 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Audi 2000 a6 quattro alarm not working


Sounds like you almost got it surrounded...

Put in those batteries... ELSE go to eBay...!!
(see bottom)

Read the MANUAL. (don't have)... FREE at...
ManualsLib Makes it easy to find manuals online


Circuit DRAWINGS & TSBs FREE at...
BBB Industries Premium Alternators Starters Power Steering Products

New - Ready to cut & program
OEM Audi Remote Flip Key Switchblade Keyless Fob Transmitter FCC ID MYT...


See...??

Carnac the Magnificent

Jan 04, 2018 | Cars & Trucks

1 Answer

Programming 2000 Audi A6 Quattro Remote Key


An Audi dealer may be able to help.

Jan 09, 2014 | Cars & Trucks

1 Answer

Alarm 2000 a6 Quattro


There may not be a connection to manually locking and remote locking. Have the key programmed first and then see if there is a problem

Jan 09, 2014 | Cars & Trucks

1 Answer

Reset keyfob


Sounds to me like the key needs to be programmed to the car by the dealer. I would take it back there and get them to program it for you.

Sep 26, 2013 | Audi Cars & Trucks

1 Answer

I bought a 2003 jaguar xtype used a month ago and it came with only one key can i buy one already programmed ,if not what do i need to buy and in what order?


You can purchase pre-programmed keys only from Jaguar. However you can purchase keys on the internet and match them to your car as follows:-

Jaguar X-Type Programming (Pairing) a Remote KeyFob X-Type 2.0, 2.5 and 3.0L

keyfob.jpg

Programming or pairing a new remote Keyfob for the X Type is a very simple job that will cost a substantial amount if it is done by Jaguar. It's annoying but this may need to be done if your Keyfob battery has been allowed to go flat, or the car battery has been removed for any length of time.
Follow these steps exactly and you should have no problems, pairing old or replacement Keyfobs for your car.

1.)I would recommended that you ensure all key fobs are fitted with new batteries. ( Click here to see battery replacement guide).
2.)Get in the car and close the drivers side door.
3.)Put the key into the ignition and turn to position I.
4.)Wait 5 seconds
5.)Turn the key quickly to position II then back to I four times.
6.)You should hear a single chime.
7.)Remove the Key
8.)For each Keyfob in rapid succesion. Press any single button on the keyfob you wish to pair, you should hear a chime as each Keyfob is paired with the security system. After the chime do the next Keyfob.
9.)Check operation of each Keyfob.
Further info can be found on http://www.bluejag.co.uk

Sep 15, 2011 | 2003 Jaguar X-Type

1 Answer

I have bought a replacement tranmitter for 2001 Suzuki Ignis Remote Central Locking System. I have an original that works but cannot Program the new one as per Owner's Manual given to me when the car was...


TRY THIS IF DONT WORK DEALERSHIP HAS TO REPROGRAM TRANSMITTER.REMOVE KEY FROM THE IGNITION SWITCH.CLOSE ALL DOORS.SWITCH IGNITION ON.WITH IN 10 SECONDS, SWITCH IGNITION OFF AND REMOVE KEY.WITHIN 20 SECONDS, PRESS AND RELEASE DRIVERS DOOR COURTESY LIGHT SWITCH 3 TIMES, SWITCH IGNITION ON, WITHIN 10 SECONDS ,SWITCH IGNITION OFFAND REMOVE KEY.LOCKS WILL CYCLE TO CONFIRM PROGRAMMING MODE ACTIVATED. PRESS THE UNLOCK DOOR BUTTON TO CONFIRM THE DOORS OPERATE FROM LOCK TO UNLOCK. REPEAT PROCEDURE REMAINING REMOTE TRANSMITTER.IF THIS DONT WORK DEALERSHIP WILL HAVE TO REPROGRAM NEW REMOTE.

Apr 18, 2011 | 2001 Suzuki Swift

1 Answer

I have a 1996 audi a4 and have bought an OEM remote from my dealership. I did the two key thing and holding remote buttons but it did not work. They checked my vin and said it was the right part, but it...


You'll need two keys.
1) Open the driver door, turn the ignition switch to on, but do not start the car.
2) Close and lock the driver door with the other key (this should be the proper key and not just the valet key - if you use the valet key the programming won't work).
3) Hold down both buttons on the fob for about 5 seconds. The lights should flash and the alarm horn should honk.
4) Open the door, remove the key from the ignition. Close and lock the door with the key.

hope this helped if not then I would go to the back to the dealer and have them do it for you.

Oct 16, 2010 | Audi A4 Cars & Trucks

1 Answer

Just bought a x reg ford puma but the key fob does not work, bought a new battery and fitted it, needs re-programming but don't know how to do it.


Telephone: Fax: VAT Registration No.:
Infrared remote control
NOTE: Infrared emitter can be seen at front edge of key.
System operation
Switch ignition ON. Ensure clock LED illuminates for 3-5 seconds. Pressing key lock button once activates central locking and alarm. Pressing key lock button twice within 3 seconds activates double locking system.
Programming
When
Key batteries completely discharged. Key batteries not replaced within 15 seconds. Key added or replaced. System malfunction.
How
Obtain all keys fitted with remote control. Turn ignition switch to position I. Wait approximately 10 seconds. Ensure clock LED illuminates.
NOTE: LED illuminates for approximately 5 seconds.
Switch ignition OFF and remove key, while LED illuminated. Programming mode activated for approximately 20 seconds (LED illuminated). Proceed as follows: Point key at receiver (located near interior lamp). Press and hold unlock button Fig. 1 [1]. After approximately 1 second key LED will flash once [3]. Press lock button 3 times Fig. 1 [2]. Release unlock button Fig. 1 [1]. Continue to point key at receiver until LEDs in clock and key have flashed 5 times. Ensure LED remains illuminated. Repeat above procedure within 20 seconds to program remaining keys. To exit programming mode and extinguish clock LED: Switch ignition ON and OFF. Wait approximately 20 seconds.
NOTE: A maximum of 4 keys can be programmed. Fig. 1
Radio frequency remote control
System operation
Switch ignition ON. Ensure clock LED illuminates for 3-5 seconds.


Pressing tailgate release button twice within 3 seconds unlocks the tailgate - if fitted. Pressing key lock button once activates central locking and alarm. Pressing key lock button twice within 3 seconds activates double locking system. Interior lamp illuminates when disarming system.
Programming
When
Key added or replaced. System malfunction.
How
Obtain all keys fitted with remote control. Fasten seat belts and close all doors. From position I, turn ignition switch as follows: To position II. To position I. To position II. To position I. To position II. To position I. Programming mode activated for approximately 20 seconds. LED or fog lamps ON warning lamp illuminates (some models) or the system will emit an acoustic signal to indicate start of programming mode. Proceed as follows: Type 1: Press and hold unlock button Fig. 1 [1]. Type 2: Press unlock button Fig. 2 [2]. Ensure clock LED or fog lamps ON warning lamp flashes (some models) or wait for acoustic signal (indicates correct programming). Wait 2 seconds. Repeat above procedure within 20 seconds to program remaining keys. To exit programming mode: Switch ignition ON. Wait 20 seconds.
NOTE: A maximum of 4 keys can be programmed.

Aug 25, 2010 | Ford Focus Cars & Trucks

2 Answers

Key/FOB programming


Jaguar X-Type Programming (Pairing) a Remote KeyFob X-Type 2.0, 2.5 and 3.0L

keyfob.jpg

Programming or pairing a new remote Keyfob for the X Type is a very simple job that will cost a substantial amount if it is done by Jaguar. It's annoying but this may need to be done if your Keyfob battery has been allowed to go flat, or the car battery has been removed for any length of time.
Follow these steps exactly and you should have no problems, pairing old or replacement Keyfobs for your car.

1.)I would recommended that you ensure all key fobs are fitted with new batteries. ( Click here to see battery replacement guide).
2.)Get in the car and close the drivers side door.
3.)Put the key into the ignition and turn to position I.
4.)Wait 5 seconds
5.)Turn the key quickly to position II then back to I four times.
6.)You should hear a single chime.
7.)Remove the Key
8.)For each Keyfob in rapid succesion. Press any single button on the keyfob you wish to pair, you should hear a chime as each Keyfob is paired with the security system. After the chime do the next Keyfob.
9.)Check operation of each Keyfob.

May 19, 2009 | 2005 Jaguar X-Type

Not finding what you are looking for?
1995 Audi A6 Logo

1,429 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...