Is this serious? Can I drive it a few days before going to the workshop?.
Mercedes -benz E320 w211 Oil level big red light will not go out.changed the sensor still on. Also had low fuel pressure I don't know why but when I Changed the fuel pressure sensor my oil level red light went out.
SOURCE: Mercedes Benz C180 Fault Message Brake Assist.Visit Workshop BAS
Hi there
BAS is the Brake Assist System and if there is a malfunction it would
only come into play in an Emergency stop while applying full pressure.
BAS applies full braking force because people tend to lighten up their
pressure on the pedal in these situations. I would suggest that the best thing to do is go to a Workshop or Service Center and have it checked out. Please remember to put a good rating on my profile.
Kind regards
Dustin Ellse
SOURCE: 2003 E320
My car keeps displaying a picture of a battery Visit Workshop. How do I clear the code?
SOURCE: 99 mercedes e320.check engine light on.po341
that appears to be a camshaft position sensor performance code. you can start by checking to see if the sensor is working properly, re-check and make sure that the harness is ok by checking the resistance through the harness if all looks well there make sure the computer has the latest software on it by having it scanned at your local dealer. also you can check the reluctor wheel on the camshaft for damage or debris in the way of the sensor.
hope this helps!
SOURCE: Engine Oil Sensor
hi, engine oil sensor is not only for checking oil lever,quality of oil,oil temperature,are also detect by our sensor,better to send your car to a dealer for diagnose,maybe fault erasing or electrical connection poor contact,ty
Your battery are okay but you may have an alternator/generator problem, it's not charging back electricity to the battery. That's the common interpretation of that battery warning light on the dash...
669 views
Usually answered in minutes!
×