Which diagnostic terminals do i bridge to check ignition timing on 96 mazda b2600

SOURCE: i need to set up the camshaft timing marks on a 1994 mazda b2600

its not just the camshaft timing marks you set up, you also have to have the crankshaft timing mark set right to or you may damage your engine
check the internet for the right timing procedure for you model car ok

SOURCE: 93 toyota corolla check engine light on

i have a 93 toyota camry and going down the road just giving it a little gas it will shut down. it will run great setting their but get to go no more then 20 mph driving me crazy can afford to get a pro but i need to know how to do the check engine light obd two will not do it help going crazy

SOURCE: how do i remove timing cover off 89 mazda b2600

put a rope to the car and toll it to the nearest scarp yard and burn the mazda

Colin Stickland

• 22516 Answers
• Posted on Jan 04, 2011

SOURCE: Hi there I have a 2003 Mazda bravo b2600 ute with

the ignition timing is set by the fact that it has a crank sensor and this is preset and not adjustable ,its fixed so the only way to adjust timing is with the dealer diagnostic software that can alter time over sense setting on the computer

SOURCE: hi,I want to check the

Hi!!
If the timing is not off, it is probably not the timing belt. The first thing you should do is to change the spark plugs, dist. cap and rotor (if equipped), If the problem does not go away, check the fuel pump pressure. On those vehicles, when the fuel pump is quitting, it starts like that, then runs for an hour and quits for 30 min. until it quits for good.
Autozone, Checkers and similar auto parts stores lend Fuel Pump Pressure Testers, ask the attendant what the correct PSI for your pump should be. Here is a diag. on how to connect the tester


Good Luck!! A HELPFUL - 4 THUMBS - rating for this solution would be greatly appreciated. Thank you for using FixYa!!