Hi FixYa friends, My problem is that the blower motor doesn't pump more air if it is set to driver and passenger vents, whether it is AC or heat, (it just works/fan accelerates when speed setting is 1 and 2 = very low air speed, higher fan speed seems to be ignored by the blower motor). But, when it is selected to the windows (defrost), the speed is really working and when I push it to higher speeds (low levels to high speed levels) all works fine, but.. just to the windows. The vent doors/actuator motors are working properly, control unit lights ok, filters ok, checked all stuff this month. Looking at forums I decided to change the blower resistor (hedgehog), did it, but the problem persists... Any idea what problem is this, please? I'm getting desperate! Best regards, Lorenah.
Sounds like blower bearings are dried out and will eventually lock up the blower..sometimes you can spray wd40 in the blower bearings and it will work fine for a while.. also check vacuum controls to the baffle dors in the ductwork..may have some leaks there.. should hear a slight hissing if really bad..repost findings
247 views
Usually answered in minutes!
×