The shifter was really hard to put into gear when it was cold. Yesterday morning, I went to put it into reverse and it kinda made a crunch noise and now it is stuck in park, The shifter moves up and down very easily now, but it wont change gears. How do I change the shifter cable?
Have the EXACT same problem. 2005 Pt Cruiser w about 88,000 miles. Became hard to shift when cold and then bam ....something broke. Moves freely. I know I'm going to get screwed on this... what should it cost to have it fixed. The guy at a shop close by (figured close to make towing easier) started into this 'its a dealer only part and blah blah...at least an hour .... " He's going to send an estimate tomorrow. I'm in E. metro Atlanta
I got mine fixed. Had to change the cable and the whole shifter assembly. It wasnt too bad in price, less then $200 total, and my son-in-law changed it in about 1/2 hr in the driveway. Just go to the dealer and get the parts break down for that area and get the cable and chances are, you will need the assembly too.
Have same problem!!! with 2003 PT Cruiser-- wife's car stuck in garage at work--- has been an occasional problem since purchased new -- took off cowling -- park interlock cable [ drivers side] lacks tension to pull pin so it will clear and engage the shifter cable-- sprayed pin with WD40-- released after some moving of interlock cable-- will avoid Park and leave in Neutral with key in -- and check on new interlock cable!!! Good Luck Chad!!!!
6,552 views
Usually answered in minutes!
I have the same problem right now i was told by my cousin who was a chrysler mechanic that it could be an interlock cable is that the same as a shifter cable? Anyways just wondering how you made out with it as i am tackling mine tommorow [email protected]
where did you find the cable for 2003 pt cruiser and how much was the cable thanks
2003 blazer shifter moves hard when cold
2003 blazer shifter moves hard when cold
×