1994 toyota camry head lights, and dashboard lights will not turn

These links show multiple fuse boxes and fuses which have something to do with daytime running light and lights.
Fuse box location and diagrams: Toyota Camry (1997-2001) - YouTube
Toyota Camry (1999 - 2000) - fuse box diagram - Auto Genius
1999 Toyota Camry Headlight Bulb Replacement, Relays and Fuses Explained - YouTube

Toyota Camry 2000 model headlight fault high beams not working xv20 Camry headlight switching off - YouTube

Toyota Camry Lights Not Working - YouTube

Poss wrong bulb, reversed wiring or bad connection when installed short to headlight switch. Check the bulb first. & fuses

check the dimmer switch, I had the same problem. this dimmer switch didn`t dim on low beem but went out on high beams, turned the dimmer switch up and down/on and off and it came back on.

OK its easy
Park you car in the garage where its rather dark and put 2 boards in front of the lights about 5 foot then turn on the lights on LOW beam now get a white pen and mark a X in the centre of the light beam and a rough line around the lights,
Now open the bonnet and behind the head lights you will see 2 knobs fitted to head light casing noe turn the top one on the Left hand side 1 turn so the light moves UP slightly and into the centre of the car MOVE the beam approx 2" to the centre then do the same to the other side light .
NOW try it out on the road in the dark both dip beam and then high beam and you might have to adjust it a bit more as dip beam must be hitting the road about 25-30 feet to the Side of the road
not to the centre.
lET ME KNOW HOW YOU GET ON
Ron

Things You'll Need:

• #H11-55W and #9005 replacement bulbs (low- and high-beam bulbs for 2007 and later models)
• #9006 and #9005 replacement bulbs (low- and high-beam bulbs for 2002-2006 models).

STEPS TO REPLACE HEAD LIGHT: Shut off the Camry's engine and set the parking brake for added safety. Also, make sure its headlights are switched off. Open the hood using the primary and auxiliary hood release latches. Locate the back of the headlight assembly and determine whether the low- or high-beam bulb needs to be replaced. Turn the headlight bulb socket counterclockwise to remove it from the assembly. Unplug the electrical connector from the back of the bulb. Carefully dispose of the bulb to prevent it from shattering or cracking.

1. 
   

check out light switch relay / harness

your cars low beams and high beams are connected to a different fuse. Check the fuse for your lowbeams and instrument panel

It is in the Switch. It is tough to replace and the Dealership is the Only Place that you can get this Switch Also. Please Rate My Response! Thanks!

I have checked the Toyota web sites and the general conscientious is the high beam switch is defective.

You may have replaced the high beam by mistake. The low beam is closer to the exterior (the sides of the car)
Paul G Schmidt
[email protected]