Iphone 5 bluetooth not pairing with 2011 silverado

Turn iPhone Bluetooth On:First you want to make sure that Bluetooth is functioning on your iPhone. Click on the Settings icon from the iPhone desktop. From the settings screen click General to show the iPhone General Settings as displayed in the below image. Notice you can see if Bluetooth is on or off from this screen. General Settings screen you can click on Bluetooth to configure the Bluetooth settings. On the Bluetooth screen shown below click to the left of Off to turn Bluetooth On.

1. Begin Uconnect Setup:Now that Bluetooth is operational on the iPhone you can start the Uconnect process. Click the Uconnect button on the rear view mirror to begin. The voice from the Uconnect system will ask you to verbally select one of the options from the menu. Once Uconnect asks for your input say "Setup" to begin the process of syncing the iPhone.
2. Start Phone Pairing:Once you say setup in the above step the Uconnect system will list numerous options available from the setup menu. One of these options is "Phone Pairing" so when the Uconnect system asks for the choices from the setup menu say "Phone Pairing".
3. Pair a Phone:In the Phone Pairing menu you can modify current entries or begin pairing a new phone. After Uconnect lists all of the choices you should say "Pair a Phone" to begin the process of pairing the iPhone.
4. Uconnect Pin Code:The first step in pairing a phone is setting the Bluetooth Pin Code that authorizes that phone to pair with the Uconnect system. When asked for the Pin Code say any four digit combination such as "1 - 2 - 3 - 4". Uconnect will repeat back the Pin Code so you can verify it has recorded properly.
5. Connect iPhone To Uconnect:After you have set the Pin Code for the Uconnect system you need to view the iPhone's Bluetooth Settings screen which you can get to following the steps in Step 1 above. Before the Uconnect system shows up in Bluetooth the Bluetooth Settings screen will look similar to the below where you may have other Bluetooth devices showing or not.After a couple seconds the Uconnect system will display as "Hands Free" as shown in the below image. Notice it states that it is not yet paired,,,,,
6. Click on the Hands Free device showing in the Bluetooth devices list above. This will open a new screen as shown in the below image that prompts you for the Pin Code you specified in Step 5.
   
   Enter the Pin Code and then click the Connect button in the top right corner of the above window. This will pair the iPhone with Uconnect and take you back to the Bluetooth devices screen where the Uconnect Hands Free device will now show Connected as shown in the below image.
   
   After the device is connected you will be prompted by the Uconnect voice again so proceed to the below steps.
7. Phone Name & Priority: After connecting the iPhone you will then name the phone and set a priority between one and seven. Name the phone anything you would like and if this is your primary phone set the priority to one so this phone always connects at a higher priority than any other phone.
8. Verify & Test:Now have a friend dial your cell phone while you are in your car to see if the music volume lowers and the Uconnect voice tells you there is an incoming call from a certain number. To make calls you can press the Uconnect button and follow the voice prompts.
The Uconnect system is a great way to safely use your cell phone in the car.

In order to connect your tracfone with the 2016 Honda CR-V via Bluetooth, then just follow the list of directions as given below,
1.Press and hold DISP to go to the Settings screen.
2.Select Phone Settings.
3.Select Bluetooth Device List (if no phone has been paired) or Connect Phone (if pairing an additional phone).
4.Select Add Bluetooth Device.
5.Make sure your phone is in discovery mode and select OK.
6.HFL searches for your phone. Select your phone when it appears on the list.
If your phone does not appear: Select Phone Not Found and search for HandsFreeLink from your phone.
7.HFL gives you a six-digit code. Compare it to the code that appears on your phone. Connect to HFL from your phone.
8.The system asks if you want to enable Phone Synchronization. Select On to automatically import contacts and call history

For more clarification, here I have attached the video with my answer which will help you out to Set Up Bluetooth connection between your headset and tracfone in 2016 Honda CRV, take a look

Thread: Cylinder 1 misfire P0301 - The Chrysler Minivan Fan Club ...

forum.chryslerminivan.net/showthread.../27978-Cylinder-1-misfire-P03...

Feb 6, 2013 - 7 posts - ‎4 authors
My mother-in-law's 2002 Town and Country has the P0301 cylinder 1 misfire error code. I haven't done much work on this type of car, so I'm not ... '05 Town & Country Cylinder 1 misfire mystery
10 posts
Feb 3, 2014
Engine misfire
7 posts
May 6, 2012
#1 Cylinder misfires at idle only
10 posts
Jun 4, 2011
Running rich / Misfire Mystery
10 posts
Sep 20, 2010
More results from forum.chryslerminivan.net

Part 1 -How to Test the Coil Pack (2001-2008 Chrysler 3.3L ...

easyautodiagnostics.com > Chrysler > 3.3L, 3.8L

Apr 29, 2011 - Page 1 of 7: How to Test the Coil Pack (2001-2008 Chrysler 3.3L, 3.8L). ... This article will help you troubleshoot a Misfire Condition that might be setting ...your 2001-2009 Chrysler (or Dodge) 3.3L or 3.8L Town and Country, Voyager, ... it's important the you know what 'Paired Cylinders' and 'Non-Paired ...

I had a similar problem with a rental car. I assume you're trying to pair up the Bluetooth between the car and the phone. We had to delete some of the stored phones from other renters to allow our phone to be paired. If you previously had phones paired with your vehicle that could be the problem.

Maybe it's something in the way your doing it bring it to the dealer and make them help u

Run the scanner /computer for to get easy diagnostic and fix it.

God bless you

Also, there should be a "Bluetooth" setting in the general settings on your radio. If so, you can pair the iPhone to the head unit. Once paired, it should let you stream music via Bluetooth. If you figure that out, and you should be able to simply forget about this problem. Again, I hope this helps... Let me know. Good luck!

Hi. There is an option to forget bt devices. Forget all of them. Pair your phone again automatically

jaguar parts dept can supply this very easy, contact the parts dept, they have manuals for what each car needs

i use to work for honda and acura and from what i recall, the iphone is and or wasnt compatible with the bluetooth sytems(factory) i was haveing trouble pairing a custs iphone in a pilot, then was told its not compatible with that phone