1993 Mitsubishi Eclipse Logo

Related Topics:

A
Anonymous Posted on Feb 05, 2013

Is the 1.8 a zero tolarance motor

The water pump went out then when i went to move the car to where i ca change the water pump the car died im thinking it jumped timming so is this motor a zero tolerance motor

3 Related Answers

dustyboner

alex metro

  • 364 Answers
  • Posted on Nov 11, 2008

SOURCE: timming marks

here is a step-by-step guide (w/pictures) for the timing belt.
Camshaft Timing Belt Replacement/Adjustment Service Procedure

Ad

jamie

  • 1810 Answers
  • Posted on Jan 06, 2010

SOURCE: thinking about buying a 2002 Galant but it needs a

remode all plugs and turn the motor over by hand
that will tell you if it a zero tol motor
remember to insert 1 plug at a time to see is the piston has compression and make sure if you fine a bad cyl to spin the cam a couple of degres to make sure it is just open valves and not bent or broken valves

if for some reason with plugs all out and motor will not turn then it is a zero tol motor and will likely need a head job with the timing belt

gtyner

  • 280 Answers
  • Posted on Mar 19, 2010

SOURCE: My 95 3000gt SL idles funny, and jumps all around.

If you can get it to an Auto Zone they can test the alternator for you while it is on the car running, but sounds like you may have to take the alternator off and carry it in. May be cam position sensor or IAC (idle air control) valve.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

The windshield wiper washer fluid pump is not functioning.

Hi Burke.
Check fuse.
Unplug connector at pump.
Get someone to activate washer lever switch while you test connector plug for 12 volts DC power.
If you don't have 12V to connector then stalk-switch may have died.
If you do have 12V then test resistance across pump motor.
No reading means pump motor is at fault and needs renewal.
If you get 12V and motor has resistance, move on to mechanical inspection....
Remove bottle, then unclip water hose and take out pump motor.
Rum motor and see if impeller spins.
0helpful
1answer

2001 dodge neon leaking water from water pump i was driving n it felt like my car went into neutral n engine lite came on n it died it will turn over but won't start what do i check

well to me it seems like you have either a intake manifold leaking or head gasket leaking also which is causing coolant to go into motor.check the oil and see if it looks milky or overfull.
0helpful
1answer

Car started to act like it was running out of gas then died,oil was low filled it,went to start it ,when I do it takes a minute to kick in.motor is turnning ,once it starts it acts like a knockin for a...

Its posible it could be the cam shaft or crank shaft positioning sensor you may be better off renting a OBD 2 scanner and get a code that would get you closer to the problem.
3helpful
3answers

3000gt trouble code p0340, p0335

NO/ MAKE SURE YOU MARK TIMING BELT POSTION BEFORE REMOVING BELT .
1helpful
1answer

Cambelt has gone in my 92 legacy, any special tools required to change it? is it a difficult procedure?

1st of all did it go with a bang or just not start? as far as im aware your motor is known as an interferance motor which if it went with a bang its a new motor or scrap the car, valves colliding with pistons. = write off.... but yes i wouldnt bother doing it yourself unless you get someone with ample knowledge, also you will need a universal pulley holder. the cams need to stay aligned while changing, also running off it is a water pump which you should also change, general cost for a full cambelt change is 1100 NZD over here.
1helpful
1answer

1991 Honda accura leaking water

i personally own an 91 integra im a mechanics student and is not an easy job . . first u have to move take all the accesory belts off move the power steering pump witout disconnecting the hoses , remove the right side motor mount , remove valve cover , take off timing cover , top middle and bottom make sure u lable eveything , also use a jack and jack stands to hold car and support the engine . remove crankshaft pulley,. if u change water pump i suggest u change timing belt too while your there . . the hardest thing is to deal with the timing you have to line it up perfect so it can start and also how tight the timiing belt is so it wont slip and cause damages, i personally did its not so easy . let me know if you got anymore questions
1helpful
1answer

1996 Seville died and won't start

Try Spraying Some Throttle plate cleaner into the throttle bore & see if it tries to start?? If Yes Most likely fuel pump died.
0helpful
1answer

Truck went under water at the boat ramp t

i do not know how much of the truck went under the water if the computer on the passenager side under the glove box got wet and maybe while you are having problems let it dry out on it own for two days and if you still having this problem you may have a short in you computer and here is a place that sells only GM parts Schram auto & truck parts the number is 1-800-292-1032
0helpful
1answer

My car wont stay running

it could be the fuel pump not working right. you can buy an electric one and put on there and it will tell you right away if your original fuel pump is dead
Not finding what you are looking for?

55 views

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...