Recently put camshaft lifters and timing chain and oil sending unit. had it put together and drove it home and went to start it and not fire. engine just spins over just wont fire.has fuel pressure and oil pressure
SOURCE: Can not find oil pressure sending unit on engine.
yes it will be on the lower part of the engine block. i believ on passenger side.
SOURCE: 96 chevy 1500 suburban wont start
check the catalytic converter i had the same problem with my suburban and mine was a clogged converter.
SOURCE: oil pressure sending unit
Hi there;
Your looking foer the oil pressure sensor on the 2004 8.1L.
You will find it located directly behind the EGR valve threaded into the block just to the drivers side of the center bolt for the transmission to block connection.
Thanks
Farrout!
SOURCE: engine sputtered, then died. Towed home. I
Might be fuel pump, or filter is pluged up, best to chg. filter and then do a fuel pressure test.
160 views
Usually answered in minutes!
×