Where can i find the routing diagram for the a/c belt on a 1998 Honda CRV

No idea just get the new belt and play with it it will come to you in the end ,remember that the belt goes right around the alternator not just around the edge if you understand my drift

The parts store you purchase belt from should be able to give you the routing.

Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.

1. The fan belt routing diagram for 2004 Volkswagen Bora 1.4 16V



2. The fan belt routing diagram for 2004 Volkswagen Bora 1.6 16V



3. The fan belt routing diagram for 2004 Volkswagen Bora 1.8 Turbo




4. The fan belt routing diagram for 2004 Volkswagen Bora 2.0



5. The fan belt routing diagram for 2004 Volkswagen Bora 1.9 TDI


CS = Crankshaft
Gen = Alternator
G = Guide pulley
T = Tensioner pulley
AC = Air Conditioning
PAS = Power Assisted Steering

It depends on the engine size for the belt routing.

Click on the "x" for the diagrams on the following engine sizes:
FIRING ORDER AND BELT ROUTING Firing Order and Belt Routing X90, Vitara & Grand Vitara Fig. 1: 1998 1.6L engine Firing order: 1-3-4-2 Distributor rotation: Counterclockwise
Fig. 2: 1999-02 1.6L engine Firing order: 1-3-4-2 Distributorless ignition system (coils over No. 2 and 4 cylinders)
Fig. 3: 2.0L engine Firing order: 1-3-4-2 Distributorless ignition system (one coil over each cylinder)
Fig. 4: Accessory V-belt routing- 1.6L engine with A/C
Fig. 5: Accessory V-belt routing-1.6L engine with A/C and P/S
Fig. 6: Accessory V-belt routing-1.6L engine with P/S
Fig. 7: Accessory serpentine belt routing-1.8L and 2.0L engines
Fig. 8: Accessory V-belt routing-1.8L and 2.0L engines
Fig. 9: Accessory V-belt routing-2.5L engine with P/S
Fig. 10: Accessory V-belt routing-2.5L engine with A/C and P/S

CLICK on the following LINK. It has all the Diagrams for your Belt that you will need.
If you would: Before Clicking let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Thanks!
http://www.2carpros.com/car_repair_information/year/1998/make/honda/model/cr-v/1998_honda_cr-v_drive_belt_routing_diagram.htm

Your local Napa store can print you out a routing diagram, but first check around under your hood, most cars have a routing sticker.

1) Start with the alternator.
2) Forward to the smooth idler
3) Forward to power steering
4) Down to A/C compressor
5) Back to crank pulley
6) Forward around tensioner
7) Back glancing off of water pump
8) Back glancing off of ribbed idler
9) Up around alternator (where you started)
Good luck!

Go on the Dayco belts web site. They make serpentine belts and a pretty good data base of belt diagrams for any vehicle they make a belt for.

Hey there MSM,

• Get a 14mm or 9/16" socket and a long handled ratchet or breaker bar.
• Get the belt around all the pulleys except the A/C compressor or Alternator. The routing diagram is on one of the radiator supports.
  
• The tensioner pulley is near the Alternator toward the center of the engine. It's on a spring loaded arm. Get your socket on the center nut of this pulley.
• Slowly pull the ratchet toward the center of the engine. The pulley will pivot on the arm allowing you to get the belt on the final pulley.
  
• Slowly release the tension.
  
• You're done

Mike