SOURCE: diagram bypass heater cord on 2001 ford expedition eddie bauer
the heater bypass is quite simple, if you look at the firewall you will see two medium sized coolant lines, remove them from the firewall and link them together using a proper sized tube, you can purchase a kit at a parts store quite cheaply
SOURCE: fuse box chrysler town and country van
2002 town and country uses a relay and fuse...check fuse # 10 (a 40amp) in the box under the hood. the relay is also there
SOURCE: removal of bypass tube for heater core.
is this the bypass tube that comes from the water pump?if so it has 2 bolts .. one on the water pump and one identical bolt, hidden on the tube bracket.
SOURCE: we need to install a new rear heater hose on our van and are not sure how too do it
I've done this many times
You will need a tubing cutter
Screwdriver
I think a 7 or 8mm socket
hose clamps
the appropriate amount of heater hose
zip ties
cut the steel heater line at the front in a place you can get access to,leave yourself enough steel hose on the rear to allow you to put the heater hose on cut off the steel hose and discard, and use 2 hose clamps on either end do the same for the other heater hose,this way is cheap and easy and permanant.Be sure that when you run the heater hose keep it away from hot or moving parts,use the zip ties to fasten it along the way,this should take about a half hour or so depending on your skills and working conditions,remember to buy some antifreeze to top up the system because you are going to spill some,remember to clean any spills animals love it and it is deadly.
1,097 views
Usually answered in minutes!
Ask someone in a parking lot at the supermarket to give you a quick look
at their similar vehicle
×