Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Jan 27, 2013

How do I replace the turn signal light in side view mirror on 2010 town and country?

3 Related Answers

defadad

Harry Goodwin

  • 353 Answers
  • Posted on May 13, 2009

SOURCE: removing and replacing passenger side mirror 2002 town and country van

there should be a triangle shaped plastic section on the interior of the door behind the mirror, check it for a little plastic screw cover to remove it or you may just have to lever it gently to remove it.
once it is off it exposes the mirror retaining bolts which you undo to remove the mirror, I presume it has electric mirrors and if that is the case you will have to find the electrical wire plug for the mirror and pull it apart, replace mirror in reverse order of removing

Ad

Anonymous

  • 88 Answers
  • Posted on Jun 01, 2010

SOURCE: Looking to replace passenger side mirror.

    Remove Old Mirror
  1. 1 Open the side door to the Chrysler Town & Country, and find thescrew that holds the side mirror molding in place.

  2. Take the screw out and remove the molding panel that attached around the outside of the power mirror.

  3. Remove the bolts connecting the mirror to the door assembly. If equipped, unplug the power side view mirror wiring harness connector.

  4. Unplug the electric connectors, and pull the mirror out of the molding.

unvme

Harold Case Jr.

  • 266 Answers
  • Posted on Dec 12, 2010

SOURCE: I have a 2010 VW

you have a 2010 vw jetta..... just take it to the dealer it's new and under warrenty

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do you replace the mirror

Is just the bulb burned out in the mirror signal lens??
1helpful
4answers

Replace the review mirror

You need to remove the plastic plate that cover the mirror joint from the inside and undo the three bolts.
1helpful
1answer

What are the wire colors for the tail lights on a 2010 Chrysler Town and country. Which are turn, brake and ground for both sides.

left signal wire is yellow the right signal wire is green black wire is ground and the brakes is the remaining wire.
0helpful
1answer

On a 2010 Chrysler Town and country what are the wiring colors for the tail and turn signals and ground. For both sides.

Well, you may not know that American vehicles use the brake light for the turn signal. so you not wanting the buzzer to sound when brakes are on is out of the question.
1helpful
1answer

How to replace town and country side mirror turn signal

With your thumb push the narrow end of the light back. The idea is to slide the light back a little toward the fatter end. This should free up the retention clip at the narrow end. Then gently pry out the narrow end of the light. I used a thin screwdriver and a piece of old leather to keep from scratching the mirror body. Once the narrow end is out the whole light will come out. unplug the old light. Do the reverse to install. Plug in the light. Put light in fat end first. Pivot the narrow end in. Slide the fat end towards the narrow end to seat the retention clip.
1helpful
1answer

How do you change drivers side rear view mirror on 01 T&C Limited

  • remove the door trim at the mirror
  • remove the three bolts holding the mirror assembly
  • disconnect the electrical connector (assuming its powered mirror)
  • remove the mirror and replace

0helpful
1answer

Looking to replace passenger side mirror on a 2006 Town and Country. Anyone have Instructions available?

    Remove Old Mirror
  1. 1 Open the side door to the Chrysler Town & Country, and find thescrew that holds the side mirror molding in place.

  2. Take the screw out and remove the molding panel that attached around the outside of the power mirror.

  3. Remove the bolts connecting the mirror to the door assembly. If equipped, unplug the power side view mirror wiring harness connector.

  4. Unplug the electric connectors, and pull the mirror out of the molding.

0helpful
1answer

I have a 2002 chy. town and country van. the

check the connector at the rear view mirror for damage or pushout pins, the mirror contains the light sensor
0helpful
1answer

Removing and replacing passenger side mirror 2002 town and country van

there should be a triangle shaped plastic section on the interior of the door behind the mirror, check it for a little plastic screw cover to remove it or you may just have to lever it gently to remove it.
once it is off it exposes the mirror retaining bolts which you undo to remove the mirror, I presume it has electric mirrors and if that is the case you will have to find the electrical wire plug for the mirror and pull it apart, replace mirror in reverse order of removing
Not finding what you are looking for?

425 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...