1999 Lincoln Town Car (Check brake Light comes on intermittently

The electronics and modules will tell the reason. It sounds like a computer network issue. You need a mobile auto electrician with a pro grade scan tool computer.

https://www.google.com/search?q=mobile+auto+electrician+near+me

..

What fuse is for my tail lights (Lincoln Town Car ...

https://www.cargurus.ca > Discussion-t16159_ds656793
I have a 1999 Lincoln Town Car. When I turn on the Headlights, the Taillights should come on, but it doesn't, I have checked all the fuses and they are O K, ...

7 answers · 9 votes: Normally the car manual have a list of the fuses

https://www.google.com/search?q=1999+lincoln+town+car+tail+lights+not+working

..

Run a diagnostic check on the car. If these codes come up this is what they mean. C1233 No left wheel speed signal
C1234 No right front wheel speed signal

C1236 No LR wheel speed signal
check wiring and sensors

The brake light switch is on the brake pedal near the top

Assuming thsat you are talkng about stop lights, I suggest check brake light switch (gemnerally is located on top, back side brake pedal).

Hope this helps and just keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa.

Jose (ZJLimited)

sounds like the brake light switch.

STOP

Do not drive the Town Car until you get the light problem figure out.


There are two possible components at fault.


Brake switch (above the brake paddle) can jam to on position.
Move the drive seat back and dive down to check on the condition of the brake switch.


Main light switch can be on its way out.


Check both and you should be on the right track/

My bet is on the foot brake switch,

YOU HAVE A FAILTY RELAY AND SWITCH IN THE CAR

did you check your brake fluid and if its not that the anti-lock light by itself wont hurt the car but the brake light coming on check your brake line hoses and see it they have ony holes in it also check out your brake resvoir and then your master cylinder all of your brake systems is connected together

change your o2 sensor