Removing plastic of engine cover polo 1.4 2006

SOURCE: Need to change spark plugs on POLO 2002

Hi it should just pull off dont be shy and give it a good yank

SOURCE: removing plastic engine cover from 2005 VW Polo

the cover just pulls off and disconnect breather hose as u lift it.there is about 15 screws to remove then the cover opens

SOURCE: How do I remove the engine cover in my 1.2cc Polo

You will notice 3 round caps in engine cover. Simply flick these 3 covers up to reveal the 10mm retaining nuts.
John

SOURCE: squeaky plastic dial cover on a vw polo 2001

mcdevito75 here, Plastic expands and contracts with heat and cold, when plastic gets tired these properties weaken, If you can"t replace the cover try to use a little vaseoline jelly or a good penetrating oild WD 40 on it.

Hans Pearson

• 2510 Answers
• Posted on Jan 16, 2011

SOURCE: PLSE EXPLAIN HOW TO REMOVE THE ENGINE COVER ON VW

Without being rude, if you cannot remove the cover it means that you are not meant to replace the spark plugs yourself. They have very delicate electronic devices on each plug lead and any damage to one of these would mean an expensive agent repair. Modern vehicles have the parts that are user serviceable marked in yellow, the rest are best left well alone.