2009 hyundai sonata fuse diagram? - 2009 Hyundai Accent

SOURCE: 04 sonata stereo wireing diagram

Battery ORANGE (+) RADIO HARNESS
Accesory YELLOW (+) RADIO HARNESS
Ground BLACK (-) RADIO HARNESS
LF Speaker (+) BROWN/WHITE
LF Speaker (-) BLACK/WHITE
RF Speaker (+) BROWN/YELLOW
RF Speaker (-) BLACK/YELLOW
LR Speaker (+) BROWN/RED
LR Speaker (-) BLACK/RED
RR Speaker (+) BROWN/WHITE
RR Speaker (-) BLACK/WHITE

SOURCE: Diagram for serpatine belt for hyundai sonata

I am taking a wild stab in the dark and supplying the diagram for the 2.0

SOURCE: My 2006 Hyundai Sonata's brake lights are not working

try the brakelight switch, it is right near the pedal above the footpad

SOURCE: a dash lite on my 2009 hyundai sonata came on

stands for Tire Pressure Monitor System= TPMS. check all tire pressures (when cold if possible) and adjust them according to the tire pressure sticker on the drivers door jamb,glove box,another door jamb or center console compartment(inside).even check the spare tire pressure. the lite comes on to tell you that either 1 or more tires is considerably lower or higher in pressure than the rest. once u adjust the pressures correctly,look in the owners manual as to how to reset/shut off the light. on alot of cars if u drive the car for awhile the light will reset and go off .hope this helps.

SOURCE: How do you change the cabin air filter in a 2009 Hyundai Sonata?

I just did this on our 2007 Sonata. 1. open the glove box. On both sides of the glove box, there is a black tab which prevents the glove box from opening to far. The Chilton manual says to remove these, but that is more difficult then simply pressing inward on the sides of the glove box to release them from the channel. Now the glove box should open even more. Next, remove the piston arm from the right side of the glove box. You can do this by removing the panel on the side of the dash, but you first need to open the passenger door. You can also just use a screwdriver or other tool to slip the piston of without removing the dash side panel. Now with the glove box hanging fully open, you can see the cabin filter box. There are tabs on both sides of the front that you simply press together in order to slide the filter out of the box. This whole process from beginning to end should only take about 10 minutes and is very simple.