Cars & Trucks Logo

Related Topics:

roger Posted on Jan 18, 2013
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I have Toyota corolla fielder 2007 model with start push button, the remote fail to lock / unlock the doors, how should i reprogram it to faunction as before?

The failure happened after my son lock and unlock about 5 or 6 times in a minute.

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Sergeant:

An expert that has over 500 points.

  • Expert 183 Answers
  • Posted on Jan 18, 2013
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Sergeant:

An expert that has over 500 points.

Joined: Nov 19, 2012
Answers
183
Questions
1
Helped
45102
Points
602

Put new batterys in the remote

5 Related Answers

Anonymous

  • 104 Answers
  • Posted on Mar 09, 2009

SOURCE: drivers door power lock wont work.

Either the wring going to that motor or the motor itself is bad.

Ad

Anonymous

  • 1 Answer
  • Posted on Apr 07, 2009

SOURCE: Need to reprogram door locks for 2004 Toyota Camry

I recently replaced the battery on my 2004 Toyota Camry. When I installed new battery the door locks will not stay unlocked once opened with remote. How do I reprogram?

Anonymous

  • 9 Answers
  • Posted on Jul 02, 2009

SOURCE: remote starter does not work but will unlock and lock doors.

depending on your alarm which it sounds like a viper model maybe? on my 02 you have to incorporate a factory alarm bypass module in order to be able to start the truck, they run about 100.00 bucks and have to be profssionally installed. The truck wont start because the computer isnt recieving the proper starting sequence due to the factory alarm

Anonymous

  • 163 Answers
  • Posted on Dec 30, 2009

SOURCE: my toyota 2007 yaris 4dr sedan keyless entry not working

they may need to recode your pad see dealer

Anonymous

  • 1 Answer
  • Posted on Feb 13, 2010

SOURCE: the power door locks will unlock only, not lock.

I am looking for the same problem. The power door lock work only on to unlock. When I try to lock the doors I hear only a cliking three time but the doors doesn't unlock

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
3answers

I lost remote to my 2007 corolla how do i get a new one if i am not the original buyer

go to any Toyota dealer. They will sell you a new key fob but they also charge extra for programming. Total cost for the key fob and programming will be around $100. any Toyota dealer can do it for you
1helpful
1answer

I have Toyota corolla fielder 2007 model with start push button, i lost the remote, how do i contact the manufacture to get another copy made for me, or the cost of changing the whole system and install a...

Rather than the manufacturer, a authorized dealership can help you out.
This happens more than you would think.
The dealership will have the equipment to match the remote to the vehicle.
0helpful
3answers

Toyota Corolla Fielder X 2007 owner user manual

I want to get toyota corolla fielder 2008model owner manul.
0helpful
1answer

Trailblazer dor locks

try this procedure, close all doors, insert key into ignition switch,press and hold door unlock switch,turn ignition switch from on to off twice, release door unlock switch,doors will lock then unlock to confirm programming mode.now simultaneously press and hold the lock and unlock buttons of the first remote transmitter after approximately 15 seconds doors will lock then unlock to confirm remote transmitter programming. if all fails to work take vechicle to dealership, they will have to use diagnostic equipment to reprogram remote.
0helpful
1answer

Replaced batery in key fob and now there is no connection between fob and security system...I can lock and unlock doors with the key and I can start car ...fob doesn't work; does not lock or unlock...

reprogram the remote transmitter. first leave driver door open all other doors closed,key removed from the ignition switch. insert key into the ignition switch,then remove it.press lock and unlock on the vechicle door lock control switch at 1 second intervals 5 times. close and repoen drivers door.press lock and unlock on the vechicle lock control switch at 1 second intervals 5 times. insert key into ignition switch. switch ignition on and off twice to program a remote transmitter code whilst erasing the original codes or three timre to check how many remote transmitters are currently registered.remove key from the ignition switch.system should now lock and unlock.twice to indicate programming mode or one to four times,slowly to indicate number of remote transmitters registered.for the solara press and hold lock and unlock remote buttons together, press lock remote button for a second period of 1 second. system should now lock and unlock vechicle.once to confirm, twice to indicate registration has failed.if required repeat button procedure to program remaining remote transmitters.note to exit programming mode close drivers door or insert ignition key.maximum of 4 remote transmitters can be programmed.if akk failed let dealership reprogram remote transmitters.
6helpful
1answer

The remote to unlock the doors won't work. replaced battery. the key will not unlock driver or passenger door or the trunk

I hope you're able to get into your car because it sounds like the system needs to be reprogrammed.

1-insert and remove key from ignition two times

2-close and open driver door two times

3-insert and remove key once from ign.

4-close and open drvr door twice

5-insert key into ign.,then close driver door

6-turn key to on (not start) then off, twice this is rewrite mode,have all remotes to reprogram it will clear any lost remotes.

7-remove key from ignition,the door locks should cycle twice.if not start over.it may take a few tries.

8-press lock/unlock together and hold for a second

9-release,and press lock on remote,the door locks will cycle confirming program.continue to do other remotes you have,steps 8 and 9.if only one in possession,you are done. To end mode open door or insert key into ignition.

You'll need to follow the steps with no more than a 1-2 second delay between each step.. hope it works

1helpful
1answer

2006 Toyota Corolla. The driver's door won't work with remote.

the actuator might have been disconnected from the lock, its attached inside the door, with a metal rod that clips into the actuator, check it out, might be a easy fix, good luck and god bless, please rate me!
37helpful
4answers

Program a remote key for 03 A6

I have an A4 and did this to re-program my key:

1. used the key to start the car...then turned it off
2. put the key in the driver door (door closed)
3. pressed the lock button on the key fob once
4. turned the key to lock the door.

This is basically the steps in the owners manual, but the car must be started with the key first, and the key must be in the door lock before pressing the lock button.
Not finding what you are looking for?

351 views

Ask a Question

Usually answered in minutes!

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...