How to change a starter in a 1992 oldsmobile cutlass ciera

promble because you need to change ur oli in it

The valve body is getting worn. There are little plastic BB's in them that wear down and start failing. Rebuild the transmission.

Since its right there at the front of the motor, you really only need a simple ratchet and appropriate sized socket or box wrench to get it loose, but you want to make sure that you label the wires as to remember which terminals they go on;if not reattached correctly, there will be electrical problems with gauges and overall car operations...

YOU NEED TO REMOVE OIL PAN TO REPLACE OIL PAN.

You'll have to have someone drop the tank and change the float in it. If not, it could be fuse or electrical problems.

1992 Oldsmobile Cutlass Ciera 2.5 liter L4





1992 Oldsmobile Cutlass Ciera 3.3 liter V-6




Hope this helps (remember to rate this answer).

It is located on the drivers side, under the dash, mounted on passenger side of steering column on a steel clip.
Good Luck . . . .

1992 OLDSMOBILE CUTLASS CIERA - L4 2.5L 2474cc 151ci GAS FI N R
Belt Routing Diagram Multiple Accessory, w/o A.C.




1992 OLDSMOBILE CUTLASS CIERA - L4 2.5L 2474cc 151ci GAS FI N R
Belt Routing Diagram Multiple Accessory, w/A.C.



1992 OLDSMOBILE CUTLASS CIERA - V6 3.3L 204ci GAS FI N N
Belt Routing Diagram Multiple Accessory, w/A.C.


For more details, dan visit DAYCO Catalogue.

I hope helps with this (remember rated this help) Good luck.

basically you have to remove the dashboard on the passenger side not a easy job

try following your positive battery cable til it ends. it should dead end into your starter