1995 Volvo 940 Logo

Related Topics:

1995 volvo 940 wagon hesitation

This started a fee weeks ago. When I start the car there is a grinding. noise. It idols fine but as I drive it will start hesitating. It usually does this when I hit 45 mile per hour and above. It does not do it all the time, and when it does it is mostly only a slight jerking but at times it will do a major jerk then drive fine for awhile. Is it the fuel filter or something major?

5 Related Answers

240cpa

  • 548 Answers
  • Posted on Jan 15, 2009

SOURCE: 95 volvo 940 DL hesitates injector error codes 113, 212, 232

Check the fuse to the injector. If it is out or got wet, it could mimic these conditions. let me know what happens. I have an 85 model.

Ad

Anonymous

  • 216 Answers
  • Posted on Jun 22, 2009

SOURCE: 1994 volvo 940 wagon rough idle feels like it is

Give it an good tune up wires,plugs,gap,rotor.

Anonymous

  • 216 Answers
  • Posted on Jun 22, 2009

SOURCE: 95 volvo 940 jetronic error

Here are the codes you need.http://www.brickboard.com/FAQ/700-900/EngineOBDCodes.htm#FuelInjectionandIgnitionDiagnosticCodesi

Anonymous

  • 6 Answers
  • Posted on Sep 12, 2009

SOURCE: 95 volvo 940 jetronic error codes 113 212 232

Change the the O2 senor on the catalytic convert. Its probably dead.

perkins48

Thomas Perkins

  • 15088 Answers
  • Posted on Jun 21, 2011

SOURCE: 1993 volvo 940 car would

Fuel Pressure Regulator

Print


REMOVAL & INSTALLATION

2.3L 4-Cylinder and 2.8L 6-Cylinder Engines

  1. Properly relieve the fuel system pressure.
  2. Disconnect the negative battery cable.
  3. Remove the fuel lines from the pressure regulator.
  4. Remove the vacuum line from the pressure regulator.
  5. Remove the pressure regulator-to-bracket retaining bolts/nuts.

To install:
  1. Install the pressure regulator in the bracket and tighten the retaining bolts/nuts.
  2. Install the vacuum line.
  3. Install and tighten the fuel lines.
  4. Connect the negative battery cable.
  5. Start vehicle and check for leaks.
  6. Ensure fuel pressure is correct.
  7. Shut engine off and install the protective cover on the fuel rail.
  8. perkins48_1224.jpgAutozone has this part for your vehicle.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer
4helpful
3answers

1994 Volvo 940 turbo wont start!!!!!! =[

I am a volvo tech and your problem is fuel pressure ralated and i had same problem in 1995 850 turbo and the fuel pump was the problem and a used one is around 35.00
0helpful
1answer

95 volvo 940 jetronic error codes 113 212 232

Change the the O2 senor on the catalytic convert. Its probably dead.
0helpful
2answers

1993 Volvo 940 sedan idles erraticly when warmed up

Turned out that my old mechanic was right...it was one of the two relays up front.
0helpful
1answer

1995 Volvo noise problem

humming noise?? a fan belt or something associated with it
0helpful
1answer

1995 940 wagon 2.2 turbo

yes it has a crank sensor below the dist in the top of the trans bell housing
0helpful
2answers

Started idoling rough and driving rough like spark plug off

check fuel filter then check the ignition system
0helpful
1answer

1995 940 wagon...stalls...ideas/help...please?

Could be several things; MAF ( Mass air Flow) sensor, (Yes you should have one), could be fuel pump on the rail or the filter next to it, could be electronic idle controler, clogged injectors, ect ect, a Volvo dealer can do some simple checks of the actual components and tell you, but have someone else fix it!
Not finding what you are looking for?

56 views

Ask a Question

Usually answered in minutes!

Top Volvo Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...