SOURCE: changing transmission filter on 1999 mitsubishi diamante
You basically have to unbolt the oil pan and then replace the filter inside.
SOURCE: Changing transmission filter on Mitsubishi
FIRST YOU HAVE TO UNBOLT THE TRANSMISSION PAN ON THE BOTTOM OF THE TRANSMISSION. THERE WILL BE FLUID IN IT SO BE CAREFUL NO TO SPILL IT. AFTER THE PAN IS OFF YOU WILL SEE THE FILTER ON THE BOTTOM OF THE VALVE BODY. IT MAY BE BOLTED ON AS WELL. HOPE THIS HELPS. LET ME KNOW. GOOD LUCK
SOURCE: mitsubishi outlander cooling fans not operating
There is a Recall to replace your cooling fan module because of this concern.
Open your hood and look at the black box bolted to your radiator fan by the battery. If it does not have a green dot on it, you have not had the replacement fan module installed.
Contact your local dealer with your VIN handy to verify the recall has not been done and to schedule an appointment.
If the recall has been done, verify if you have power coming out of the module to the fans, as the fans do burn out eventually.... but rarely both at once.
SOURCE: how do you reset change oil light on mitsubishi outlander
Turn the key off.
Press the "Info" button on the left of the dash cluster until your maintenance miles/months screen is displayed.
Press and hold the "info" button until the maintenance screen begins flashing.
Release the "info" button and then push and hold it it for one second.
Your Maintenance intervals should reset to +6 months and +7500 miles since the last interval amount.
Note that if you have not reset it for more than one interval, you may need to do it more than once. If you have not done it for many intervals, you may need to have it reset with the scantool at a dealer, as I have run into a handful of vehicles that the oil change reminder locked up after 3-4 "intervals" were skipped/not reset.
SOURCE: transmission filter location,2002 mitsubishi galant?
my 02 galant is leaking but all fluids a full
89 views
Usually answered in minutes!
×