I need a timing belt diagram for a 1994 ford ranger 2.3 liter.

Not sure what your looking for , but give this a try
diagram 1997 ford ranger 2 3 liter engine 4 cylinder stick shift five...

1994 Ford Ranger 3.0 liter V-6 VIN "U"




Hope this helps (remember to rate this).

There should be a decal under the hood, 2 or 3 to be exact, vacuum routing, serpentine belt roouting, and a/c info.

My apologies for the delayed response. I am going back to answer unanswered questions.
CLICK on the following LINK. It has the Timing Belt & Mark(s) Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my sincerest apologies...
Thanks!

http://www.2carpros.com/car_repair_information/year/1994/make/ford/model/ranger/1994_ford_ranger_timing_belt_diagram_marks.htm

diagram for timing belt, if so need email address and is it 2wd or 4wd

I was looking for diagram for the serpentine belt for a1991 ford ranger
extra cab,four wheel drive, 4.0 liter engine but found out I had the wrong size belt. thank you anyway

crank sensor or cam sensor

1991-1994 2.9L and 3.0L Engines Firing Order 1-4-2-5-3-6 1995 And Later 3.0L V-6 With DIS Ignition System Firing Order 1-4-2-5-3-6
4.0L Engines Firing Order: 1-4-2-5-3-6 DIS Ignition System

A manual will have pictures and everything.
Just replaced mine. Five bolts in bracket holding tension idler, A/C compressor (if applicable) and power steering pump must be removed to access 3 bolts in water pump. Just push aside enough to access remaining bolts. Email at [email protected] if additional info is needed. Also, diagram serpentine belt before removing. Took me at least 15 attempts and 20 minutes to figure out