How do I replace the power steering pump in my 2002 pontiac montana
Remove the drive belt, remove the 3 mounting bolts by using a socket ththrough the holes in the drive pulley. Remove the upper intake to give you room, slide off the rubber return hose, remove the pressure line and lift out the pump. Just reverse the process to instill the new pump. And fill with the proper fluid.
SOURCE: Where Does The Power Steering Fluid Go In A
look for the power steering resevoir. black cap.
SOURCE: replace thermostat 2003 pontiac montana
yes but with the right shaped wrenches and tiny hands it can be done without removing the exhaust crossover pipe
SOURCE: 2002 Pontiac Montana Thermostat replacement
check the coolant level fiirst...if that is low it wont give you any heat.....to change the thermostat you have to follow the top radiator hose to the engine.at the send of it you will see a clamp take it loose...then you will see the thermostat housing its held in place by 2 bolts . once you remove them you have the thermostat....make sure you clean all the old gasket material off both the housing and mount.also make sure you get a new gasket.
SOURCE: need to replace thermostat on pontiac montana van.
public library...Chilton or Haynes auto repair manuals or collisionrepairadvice.com make sure you bleed the system
1,877 views
Usually answered in minutes!
×