How can i get my high beams of if switch dont work

High Beams won't work but low beams work - Exterior Forum - j-body ...

www.j-body.org/forums/read.php?f=7&i=354638&t=354638

Jan 17, 2008 - -The DRL's work fine and light up normal, and yet they take wattage from the high beams that don't work. -Both headlights have been replaced ..

Ford F150 High Beam problem FIXED - YouTube

? 8:18
https://www.youtube.com/watch?v=m_z6D7VcZic
Nov 23, 2013 - Uploaded by VaporKits
This is how to repair a High Beam light switch on a Ford F150. ...Don't like this video? ... 2001 Ford F150 Headlight Switch Troubleshooting and Replacement ... RELAYS fix repair how theywork Or REPLACE with Cheap ...

sounds like you need a schematic. ?
evah see this.
http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

see WIRING?
see HL?
see 8w-50
its all there.
use a voltmeter to find the point of lost power.

did you say the flash work but highs dont??
if switch pos, 2 works and 3 dont, the switch is bad
if spich pos 3 works and 2 dont, same.
see? they use the same power sources, and same lamp path
8w-50 page 2

Firstly start at main on/off switch then main beam/dip switch failing that have a look at the lighting relays..Good-luck.....

the low beams go threw the switch also and that side of the switch burns out

replace the high beam dimmer switch instead

check fuse first, then, fit new bulbs,then, if that dont work, fit a new column switch arm.(high beams have a relay,low dont.)

high beam switch is faulty look at getting a new stalk.....

Could be that your high beam light's are burnt out and need to be replaced. When you say the the switch is new you mean the lever on the stearing collum is new right?? Good luck

no your highbeam switch has gone bad

There are no relays for the headlights. Your problem could be from the headlight switch. You would have to check and see if you have power coming out of the switch on the low beam side. Check with a test light.