I've got two repair manuals but both are pretty unclear when it comes to how I'm suppose to remove the cable. Any ideas?
Hi Dork,cool name,here's a link to the cables,it may be like yours and no help,let me know and I will do more exploring for you.
the link doesnt work
Are you saying the link won't take you to the site or the information on link is no help,I just clicked the link and it worked,it 's a autozone repair guide iwas sending you,can re send,let me know.
i went to the link, What I'm tryin to do is replace the heater control assembly but the tempateru control lever (control cable assembly is giving me problems)
×
SOURCE: How to remove dash on 1991 Ford Tempo
i dought its glued start undoing screw and nuts youll be fine
SOURCE: need color codes for stereo 1990 ford tempo
Hi and welcome to FixYa,
Would the below wiring scheme help?
Good luck and thank you for asking FixYa.
SOURCE: How do you remove moisture from inside of
if the car is old enough and you don't care you can drill three holes in the base of the front of the light to empty it out so you don't have to change the bulb constantly due to it flooding as i did or you simply can go to the dollar store and get some gasket stuff and take it apart and dry it and the use the gasket stuff to permanent seal I am going to try this myself as i have heard of this and will let you know further in a day or so plus i have to fill the drill holes because i still have the holes and that causes condensation but not the flooding that was burning out the bulbs.
SOURCE: How do you replace a oil pan on a 1985 Ford Tempo Do you have to remove engine?
u should not have to remove pan. if the seal is leaking just replace. when u loosen the bolts it will provide enough room to replace gasket.
if you really have to replace the pan. you have to loosen the motor mounts and jack up the engine a little. be very careful!!!!
137 views
Usually answered in minutes!
×