My q7 will not start engine just turns over - 2006 Audi Q7

Question edited for clarity, year make model.
Question moved to Audi Q7.

Audi Q7 (4L; 2007-2015) fuses and relays

https://fuse-box.info > audi > audi-q7-4l-2007-2015-fu...
Here you will find fuse box diagrams of Audi Q7 2007, 2008, 2009, 2010, ... Assignment of the fuses and relays in the engine compartment (diesel engine) ...

Fuse box diagram Audi Q7 and relay with assignment and ...

https://fuseandrelay.com > audi > q7
Description of fuse boxes and relays Audi Q7, their locations and diagrams. ... V12 TDI: Coolant circulation relay after off. engine -J151- (V6 FSI from ...
‎Passenger compartment · ‎Front right fuse box · ‎Relay and fuse box in the...

Fuses and relay Audi Q7

https://fusesdiagram.com > audi > fuses-and-relay-audi-...
For the Audi Q7 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 model year. Cigarette lighter fuse - (fuse box in Right cockp it : fuse panel, fuse ? ...

No power to the fuel injectors can be caused by a few things. If the relays, fuses, and computer all check out then I would move on to looking at the engine management and fuel system. ... A no start condition can also be caused by a faulty fuel pump, or any of the associated components.
https://www.yourmechanic.com/question/car-won-t-start-no-power-to-injectors-by-joelle

2008 Audi Q7 4.2L PREMIUM-QUATTRO-NAV-SUNROOF ...

? 2:58
www.youtube.com/watch?v=MrLvBJRKt7g
Jul 8, 2011 - Uploaded by CircleofCycles
2008 AUDI Q7 Fond Du Lac, WI Stock #B2059 866-606-9906 http://www. ... 4.2 LITER V8 ENGINE, FACTORY NAVIGATION SYSTEM WITH NAV DISC ... 2015 Audi Q7 S Line 3.0T Quattro Tiptronic Full Review / Exhaust/ Start ...

You can't, you need to take it to your Audi garage as the diagnostic computer needs to be connected. On older models there were ways related to the sequence of using various ignition settings, indicator presses etc.. not anyy more

1-Turn off the ignition.
2-Place the reset tool into the diagnostic system, found near the Audi's hood release latch.
3-Press the reset tool's "Select" button.
4-Turn on the ignition, but do not start the engine.
5-Press the "Enter" button on the tool and wait 10 seconds for the tool's lights to come on.
6-Turn off the ignition. Remove the reset tool from the Audi Q7

Alright it gets complicated...
I'm assuming you have a 4L (2005-2015) model.
It will be in the under bonnet (hood) relay panel.

It can be any two of five relays depending on engine and year!
For petrol engine models up to June 2009 it's relays A1 and A2.
For petrol engine models from June 2009 it's relays A5 and A6.
For diesel engine models (3.0 and 4.2) it's relays A5 and A6.
For diesel engine models (6.0 V12) it's relays A2 and A4.

For all fuse and relay information (RHD & LHD) see here:
http://knigaproavto.ru/shemy/en/audi/q7/179-audi-q7-fuse-box-diagram-4l-2005-2015.html

To troubleshoot the issue,click the link below:

Car Repair Diagram

http://technoanswers.blogspot.com/2013/03/car-repair-diagram.html

-------

This will help.

Thanks.

My Audi Q7 has an V8 Fsi Engine and the check engine light is turned on ince years. But I cannot pass inspections, so year after year I am hvg those problems. Audi cannot find the problem! Better no more Audi!!!!

Make sure its in park, and check for a release button.

Hi, When jump starting this vehicle make sure that the Q7 is connected first, then connect to the jumper vehicle. Connect 1 lead to the positive on the Q7 and the negative to a good solid body part or engine part. This will then ensure that the vehicle will start on the jumper vehicles battery directly without going through the Q7 flat battery causing the electronics to strain.
Hope this helped.
Thanks
Jason