I am new to working on cars and recetly was gifted a '05 hyundai elantra. i would like to find the procedure to change oil on a 2005 hyundai elantra.
It is very easy to change the oil put the car on ramps secure the back end look for the drain plug underneath the engine make sure you have the right size wrench and when you remove the plug also check the gasket on the plug to make sure it is not cracked you will also need an oil filter wrench and my other suggestion to you is to go to autozone to see if they have a Haynes repair manual for your car and if they don't see if they can order you one in the mean time they can also print you off a diagram of how to change the oil in you car safely
This one is simple
1. Remove dip stick and filler cap.
2. Remove oil plug from oil pan and drain oil into an appropriate pan.
3. Remove and replace oil filter. (Filter will drain oil, just be aware to try and get it into the pan.
4. Refill oil. Start with 3.5 quarts, put cap and dip stick back on and start car, wait about 10 seconds and then turn off.
5. Check your dipstick for proper oil level.
And thats it you are done.
Go online and buy a chilton repair manual for your car. it will pay for itself many times over(about 30.)
3,650 views
Usually answered in minutes!
p0447 code
how to remove oil control valve
bolt removal sequence from removal to installation
how to change a timing belt on a hyundai Elantra 1.6 16v
×