Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Jan 05, 2013

Belt routing diagram for 1985 silverado - 1985 Chevrolet K1500

5 Related Answers

wyno62

wayne

  • 364 Answers
  • Posted on Jan 01, 2010

SOURCE: diagram for a sepintine routing belt (Chevy Diesel 2004)

this should help you, please leave a good feedback thankyou and good luck.
10846db.jpg

Ad
johnjohn2

Johnny Brown

  • 5763 Answers
  • Posted on Mar 14, 2010

SOURCE: routing diagram for a Chevy G20 serpentine belt?

Okay, there are a few engines that come in this van, lucky there the same except,they come with or without ac or airpump, so i will give you all of them and you choose the right one.a613984.gif492790a.giffd1ae03.gif47b4a5f.gif

Anonymous

  • 1851 Answers
  • Posted on Apr 03, 2010

SOURCE: belt diagram for 2000 silverado 1500 5.3 liter,

under the hood is a sticker - or better yet - take the vin to the dealer - they will give you a free print out or even email or fax it to you.
Best of it.

722dc89.jpg

Testimonial: "Thanks for the feed back. Happy Easter. Lallen."

Patrick Rayome

  • 1757 Answers
  • Posted on Apr 10, 2010

SOURCE: I need a serpentine belt/routing diagram 2000 chevy tracker.

For the 2000 Chevrolet Tracker:

Most modern vehicles have the Belt Routing Diagrams on the undeside of the Hood. But the sometimes disappear.

I do not know if you have the 1.6L In-Line 4-Cylinder, or the 2.0L DOHC In-Line 4-Cylinder. Nor what Engine Options you have (AC/No AC, etc.).

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2000/make/chevrolet/model/tracker/2000_chevrolet_tracker_drive_belt_routing_diagram.htm



Anonymous

  • 244 Answers
  • Posted on Apr 23, 2010

SOURCE: need a serpentine belt routing diagram for 2001

it doesn't show you under the hood near the hood latch ,newer vehicle it should. check this first.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Belt digram 1999 chevy 1500

You can get a diagram if you Google yr make & model and belt routing diagram and that will show an image. I have not figured out how to post diagram to fixya yet
0helpful
1answer

How do i find a belt diagram 1985 350 5.7L with air?

Do a search on goggle and it will show you the correct routing for the belt. Just put your make, model and engine size in and you can see the routing. Hope this helps.
0helpful
1answer

Need belt routing diagram for 01 chevy silverado 2500hd with 8.1 liter v8

Try this website for belt routing:
http://www.accessdayco.com/automotive

This is the routing for 8.1L w/ Multiple Accessory, w/130 Amp Alt., w/A.C.
There are a couple more shown for the 8.1L.

zeevert_52.jpg
0helpful
1answer

Need veiw of belt set up

DRIVE BELT ROUTING DIAGRAM IS ON THE RADIATOR SUPPORT.OR GO TO AUTO ZONE OR ADVANCE AUTO PARTS.THEY WILL PRINT BELT DIAGRAM FREE.
2helpful
1answer

The airconditioning belt broke and I don't know how to install a new one. Its a1999 Silverado 2500 with a 6L motor

There should be a belt routing diagram on the radiator shroud or around the engine well. Find the idler tensioner pulley, install the belt per the diagram, using a wrench or ratchet to release the tensioner to get the belt on. Make sure the tensioner isn't froze.
2helpful
2answers

How about advise on a 2003 chevy silverado 2500 hd "alternator / drive belt replacement"

The instructions are below. Also, there will be a diagram for the routing.
  1. Before you begin, visually confirm the belt routing to the engine compartment label (if present) or to the appropriate diagram in this section (if the label is not present). If you cannot make a match (perhaps it is not the original motor for this vehicle), scribble your own diagram before proceeding.
  2. Disconnect the negative battery cable for safety.
  3. Install the appropriate sized breaker bar, wrench, or socket to the tensioner arm or pulley, as applicable.
  4. Rotate the tensioner to the left (counterclockwise) and slip the belt from the tensioner pulley.
  5. Once the belt is free from the tensioner, CAREFULLY rotate the tensioner back into position. DO NOT allow the tensioner to suddenly snap into place or damage could occur to the assembly.
  6. Slip the belt from the remaining pulleys (this can get difficult is there is little room between the radiator/fan assembly and the accessory pulleys. Work slowly and be patient.
  7. Once the belt is free, remove it from the engine compartment.
To install:
  1. Route the belt over all the pulleys except the water pump and/or the tensioner. Refer to the routing illustration that you identified as a match before beginning.
  2. Rotate the tensioner pulley to the left (counterclockwise) and hold it while you finish slipping the belt into position. Slowly allow the tensioner into contact with the belt.
  3. Check to see if the correct V-groove tracking is around each pulley.
7927c2f.jpg

3helpful
1answer

Diagram for a sepintine routing belt (Chevy Diesel 2004)

this should help you, please leave a good feedback thankyou and good luck.
10846db.jpg
0helpful
1answer

Belt routing diagram for 1985 lincon town car.

The routing schematic for the serpentine belt is usually found on the fan shroud. But, if yours is missing you may contact your local lincoln dealer to see if they have the decal for that vehical or that engine.
0helpful
1answer

Need a diagram showing belt route on left side of motor and part number

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1985/make/ford/model/ltd_crown_victoria/1985_ford_ltd_crown_victoria_drive_belt_routing_diagram.htm

Again my apologies...
Not finding what you are looking for?

236 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...