Need a diagram for serpentine belt 1998 Ford Contour 4cyl 2.0l.

Question edited for clarity and toss in some CAPS.
Question moved to model category.

In the link

https://www.google.com/search?q=2000+Ford+Contour+SVT+2.5.+water+pump

Or do you meant the Serpentine Belt Diagram that runs the water pump?

https://www.google.com/search?q=2000+ford+contour+svt+2.5+serpentine+belt+diagram

....

Need help URGENTLY Have 1998 Ford Contour 2 0L 4cyl engine Car will not...

Look at the label in the engine compartment (on radiator, fender, near fan shroud). This link will take you to a sketch of the belt routing diagram
https://www.google.com/search?q=1998+ford+contour+belt+diagram&client=firefox-a&hs=mql&rls=org.mozilla:en-US:official&channel=sb&tbm=isch&imgil=Yh3AnkkPdEiexM%253A%253B6ZePHquFxFIIXM%253Bhttp%25253A%25252F%25252Fwww.2carpros.com%25252Fquestions%25252Fford-contour-2000-ford-contour-serpentine-belt-diagram&source=iu&usg=__K8vWmIKtxLMKQPOnpbU4jU45_co%3D&sa=X&ei=RIjdU9SzIM22yAShyIL4Bw&ved=0CCEQ9QEwAA&biw=1280&bih=902#facrc=_&imgdii=_&imgrc=Yh3AnkkPdEiexM%253A%3B6ZePHquFxFIIXM%3Bhttp%253A%252F%252Fwww.2carpros.com%252Fforum%252Fautomotive_pictures%252F337695_belt_1.jpg%3Bhttp%253A%252F%252Fwww.2carpros.com%252Fquestions%252Fford-contour-2000-ford-contour-serpentine-belt-diagram%3B373%3B300

The replacement belt is usually less than $30 dollars. It is in a pretty narrow spot, but can be changed with basic tools. Look for the tensioner that moves back and forth. You can usually pull up on the belt with your hands and look for the part that moves.. This is the tensioner... When you are replacing the belt.. a wrench will be needed to move the tensioner and allow you to put the belt on... Hope this helps.

go here to download a manual for a 98 ford contour, http://safemanuals.com/user-guide-instructions-owner-manual/FORD/CONTOUR-1998, this should have the fuse diagram in it.

1998 FORD CONTOUR - L4 2.0L 1989cc 121ci BI-FUEL FI N Z

Multiple Accessory, w/o A.C.



Multiple Accessory, w/A.C. (Mfg. After 2/98)


Multiple Accessory, w/A.C. (Mfg. Before 2/98)


More details, can find in DAYCO Catalogue

I hope helped with this. Good luck (remember rated thie help).

There should be one under the hood look good on the fenders also and front on top of radiator

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies....
http://www.2carpros.com/car_repair_information/year/1998/make/ford/model/contour/1998_ford_contour_drive_belt_routing_diagram.htm

no problem. If you are getting that low of voltage on a load then you might want to test the alternator as well to make sure it is running at capacity.

Top one is for a 2.0, with AC, bottom one is the 2.5 with AC.