Mini cooper code p2096

Where did you get codes? Whomever ran test should have told you.????
All vehicles in North America use OBD 2 codes, look on line you can find them Took about 10 seconds.
https://www.troublecodes.net/pcodes/p0031/
https://www.obd-codes.com/p0031
https://www.obd-codes.com/p0037

Old question that must have been resurrected by spam, but I fixed the dreadful written English tossed in some CAPS and a few SPACES! It looks pretty now.

All questions need full 'year make model', rather than 'year make, engine size'.

Anyway, there is this thing called Google. It knows everything. Here is your first code. Just copy and paste the others in and press enter.

https://www.google.com/search?q=2002+Dodge+5.2.+What+are+the+codes+P0031

What Does P0031 Mean?

The P0031 code is a result of the bank 1 HO2S1 (pre catalytic converter heated oxygen sensor) heating element having low voltage. Heated O2 sensors have a seperate heater inside the sensor to get them to operating temperature quickly.Oct 1, 2018

OBD2 Codes - P0031 - Meaning, Causes, Symptoms, & Fixes

..

P0037 HO2S Heater Control Circuit Low B1S2

https://www.obd-codes.com/p0031 Check for a fuse bing blown , Heater circuit shorted in O2 sensor blowing the fuse , maybe . You don't say what make , model an year vehicle an engine size .

Russ B,

Join one of the several Nissan Users Groups and you will find many kindred, knowledgable souls, ready to assist.

i have an '08 Coupe, 6 sp with the 3.5.

Excellent car.

All the best

I am getting two codes on my 2004 Volvo S-40 I. P0031 and P0037.
I have also changed both oxygen sensors with OME sensors. What do I look for next

CHECK ENGINE OIL PUMP

code P0031 - O2 B1 S1 heater circuit low. code P0037 - O2 B1 S2 heater circuit low.

What year is the vehicle ? Codes P0031 37

U will have to clear all fault codes first the start the car and let it idle for a while switch off and scan again to see with sensor caused the fault codes the first time

Have you cleared the codes at least once?
The new o2 sensors should have removed all those codes.The sensor closest to the engine b1s1 may be defective.Check wiring and plug to that one closely.