Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Jan 02, 2013

I have a 1995 olds regency elite 98 and my blower for heat wont work

Where is the fuse for the blower motor

5 Related Answers

Anonymous

  • 99 Answers
  • Posted on Nov 30, 2008

SOURCE: Trunk lid closer will not work, fuse is good.

prbably looking at replacing the motor and gear assembly, gm had lots of problems due to slamming of the lid too hard

Ad

Anonymous

  • 4 Answers
  • Posted on Jan 20, 2009

SOURCE: Blower Motor on a '98 Olds Intrigue

THe blower motor is under the dash. You will have to take out the glovebox and half of the dash to get up in there, but if you have the time and the energy you can fix yourself. Will have to disconnect heater core hoses under the hood

Anonymous

  • 84 Answers
  • Posted on Feb 25, 2009

SOURCE: 1991 olds 98 regncy elite blower motor not working

There is a fusible link for the blower motor. Check that. Don't know where it is. Look up the wiring diagram at autozone.com. Also check the fuse in the fuse box. Could just be that.

Anonymous

  • 25 Answers
  • Posted on Jun 25, 2009

SOURCE: The location of the blower motor relay on a '90 Olds 98 regency

might be behind the glove box or under hood on firewall

Anonymous

  • 1392 Answers
  • Posted on Aug 05, 2009

SOURCE: The blower motor on my 1993 Oldsmobile 98 Regency

You need a blower motor resistor.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1991 Oldsmobile 98 Regency Elite. How do I change the HVAC control module please?

Question edited for clarity.

Check out the previous Fixya question with answer, and the other information in the link. It is a known issue.

https://www.google.com/search?q=1991+Oldsmobile+98+Regency+Elite.+How+do+I+change+the+HVAC+control+module

..
0helpful
1answer

Fuse blows when you push the button in for heat or air\r\n1986 olds 98.where is the relyay that control the heater,blower motor

It should be under the hood in a fuse box & look on the underside of the top of the fuse box cap.
0helpful
1answer

Heat turns on - blower motor not working. 1997 olds regency

check fuses if they are still good change the blower motor instructions below not hard to do!
  • Disconnect the negative battery cable.
  • Disconnect the blower motor lead connector from the wiring harness connector.
  • Remove the blower motor cooling tube from the blower motor.
  • Remove the four retaining screws.
  • Turn the motor and the wheel assembly slightly to the right so that the bottom edge of the mounting plate follows the contour of the wheel well splash panel.
  • Lift up on the blower and remove it from the blower housing.
  • Installation the new blower motor by reversing the removal steps.
  • Connect the negative battery cable.
  • 0helpful
    1answer

    1995 Olds 98 Regency Elite I'm re-attaching rear

    there is a small set screw in the base of the mirror you will need to loosen this and then slide the metal plate out.
    4helpful
    3answers

    1991 Olds 98 Elite heater blower motor continues to run with key off. Will change speeds with controls but will NOT shut off..

    if you haven't got your blower fan fixed yet, im sure it to be the same as mine, the blower motor relay which is out on the firewall under the big fuse block. take plastic cover off over the fuses and move the fuse block out of the way and you will see it staight under that. should be two screws holding it on.
    0helpful
    1answer
    0helpful
    1answer

    1991 olds 98 regncy elite blower motor not working

    There is a fusible link for the blower motor. Check that. Don't know where it is. Look up the wiring diagram at autozone.com. Also check the fuse in the fuse box. Could just be that.
    0helpful
    1answer

    I just changed the blower motor in my ols regency elite and still no blower...just a fuse or what?

    Sounds like the blower motor resistor to me check the fuses and the see if you have any power to the resistor
    0helpful
    1answer

    Trunk lid closer will not work, fuse is good.

    prbably looking at replacing the motor and gear assembly, gm had lots of problems due to slamming of the lid too hard
    Not finding what you are looking for?

    100 views

    Ask a Question

    Usually answered in minutes!

    Top Oldsmobile Experts

    ZJ Limited
    ZJ Limited

    Level 3 Expert

    17989 Answers

    Thomas Perkins
    Thomas Perkins

    Level 3 Expert

    15088 Answers

    john h

    Level 3 Expert

    29494 Answers

    Are you an Oldsmobile Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...