I do some maintenance for the fuel pump I start the engine but not started and 2 of the camshaft hummer are broken then I change it and I want to start after setup the timing gears I need drowning or guideline so I will not break the parts another time diesel engine
SOURCE: need the timing marks for a 3.1 td 5 cyl diesel injection pump
isusu engine?? have you looked for a 8mm hole in timing gear that corresponds with a hole on plate behind then lock it in with a bolt ,remove bolt after tightening belt .DONT FORGET THIS ???.....if you cant find anything do it with no timing marks easy --- piston no 1 at tdc valves closed spin pump till fuel comes out of no 1 injector feed and lock it all together,indirect diesel is 6/8 ,,,,,direct injection is 12/16,,,,and turbo is 18/22 btdc
SOURCE: i changed my gaskets ant the timing belt on a audi
if u have a dohc engine and the timing was off u prob bent the valves head job needed
Testimonial: "YOU WAS RIGHT "
SOURCE: Location of camshaft position sensor on a 2001 Hyundai Elantra wL
The camshaft position sensor is located on the engine near the timing belt cover and under the upper radiator hose.
866 views
Usually answered in minutes!
×