I checked the fuse, it is ok. wipers worked one day now don't
Maybe worth checking wiper switch or wiper motor.If you have a multi-meter it maybe worth checking power supply to switch and motor..hope it helps.....
SOURCE: I have a 1992 ford taurus changed the multi
Wire connection are the only thing left to check. But then again multi function may not be operational you just a have to ck connections motor for wiper may be bad also
SOURCE: my 2000 taurus windshield wiper not working, all
If you have good voltage as well as a good ground to the motor then yes I would say it's the motor that's bad. I hope this helped and good luck.
Check the relay relay maybe latched on. See if there is an identical relay in the box and swap them if problem goes away replace relay.
SOURCE: Windshield wipers on 1986 Ford Ranger stopped working
unplug the wire at the wiper motor and then turn the key on and then turn the wiper switch on and test the wires at the plug with a 12 volt tester . if u dont have any thing then ur wiper switch is bad , if u have juice at the plug then it sounds like its the motor.
329 views
Usually answered in minutes!
×