ANY POINTERS ON CHANGING THE THERMOSTAT ON A 2002 DODGE DURANGO
Make sure engine is cool then drain coolant by opening the drain plug at bottom of radiator. remove cap from radiator so coolant will continue to drain and when coolant is down enough to pull off upper radiator hose at intake then close drain, then remove two bolts at coolant housing and remove thermostate. clean gasket material from intake and housing and replace with new gasket and thermostate tighten bolts install hose fill rad with coolant water mix 50/50 and run engine with heat on floor until gets hot and you see coolant flowing in rad, install cap
609 views
Usually answered in minutes!
fuse for dashboard lights
×