My wife and I went Christmas shopping one night and we came out of the store,the guy parked next to me in a 2003 F-350 says "watch this" and he used his remote to unlock my 2000 Ford Ranger but it will not unlock his truck now. Now my remote will not work on my truck and the process to reprogram the remote will not work either ,what do I need to do now?
SOURCE: disarming the alarm
Try this,I think this will work.Unplug the Remote anti-theft module in the right hand kick panel.It will have 2 connectors,one is 22 cavity connector and the other is 26 cavity connector.
Now best I can tell by looking at the Schematics you will have you take the wires from pin 11 PK/LG and pin 22 PK/YE in the 22 pin connector and pin 1 LG in the 26 pin connector and run these to a ground.Then leave the RAP module disconnected. This should keep your electric door locks working and disable the alarm.
SOURCE: 2002 Ford Taurus keyless entry
if it was factory installed theres usually a fuse in the fuse panel whereever that may be...replace the fuse with the same voltage as the other one says. but if the fuse isn't in the fuse panel its most likely under the hood, to the right...hope this helps. =)
SOURCE: need keyless entry code for a 04 an 99 ford explorer
On your 99 model the module is located behind the left quarter trim panel,mid-way.You maybe able to see it by removing the speaker cover or the cupholder on top. The module will have a sticker with a 5 digit code.
On the 04 the model is behind the right quarter trim panel toward the front about even with the right rear door stricker.
SOURCE: how to reset factory code on keyless entry ford five hundred
if you do not already know the factory code, the only way it can be obtained is by your local ford dealer. the proprietary computer equiptment they have can access the code that is programed in vehicles security module. if you purchased it used..it is often that the keyless entry code id card is still withe the owners manual..it is a 5 digit code printed on an credit card sized card that is white in color..i hope this helps you...good luck
SOURCE: ford 2000 excursion keyless entry not working
look online or go to the dealer and find a reprogramming procedure.
?€¢
The body control module (BCM) commands the horns on. The BCM commands the horns on under either of the following conditions:
-
When the content theft deterrent system detects a vehicle intrusion. For further information, refer to Content Theft Deterrent (CTD) Description and Operation in Theft Deterrent.
-
When the panic button is depressed on the remote control door lock transmitter. For further information, refer to Keyless Entry System Description and Operation in Keyless Entry.
-
When the OnStar?® system is used to sound the horns, if equipped. For further information, refer to OnStar Description and Operation in Cellular Communications.
-
When the keyless entry system is used to lock the vehicle, a horn chirp may sound to notify the driver that the vehicle has been locked. The notification feature may be enabled or disabled through personalization. For further information, refer to Keyless Entry System Description and Operation in Keyless Entry
250 views
Usually answered in minutes!
×