I need the diagram for a 2001 pontiac sunfire serpentine belt diagram
SOURCE: 97 pontiac sunfire 2.2 liter serpentine routing diagram needed
this is normally located under the hood next to the hood release lever if it is missing from yours then try www.autozone.com or go to your local Pontiac dealership in the parts department or an auto parts store like Napa or Autozone
Turn off the engine and place the transmission in park (automatic) or first gear (manual). Engage the parking brake and open the hood. Disconnect the negative cable from the battery terminal using the battery terminal wrench.
Remove the serpentine belt by inserting the end of the serpentine belt tool into the square hole on the belt tensioner and rotating the removal tool clockwise. Unplug the alternator's electrical connector. Remove the bolt holding the positive voltage cable to the alternator using a 3/8-inch ratchet and a metric socket. Remove the positive voltage cable from the alternator.
Remove the alternator bracket bolts using a metric socket connected to a 3/8-inch ratchet. Remove the alternator from the car. Place the new alternator in the mounting brackets and reinstall the mounting bolts using a 3/8-inch ratchet connected to a metric socket.
Reinstall the positive voltage cable on the alternator and tighten the retaining nut using a 3/8-inch ratchet and a metric socket. Plug in the alternator's electrical connector. Compress the serpentine belt tensioner using the serpentine belt tool. Reinstall the serpentine belt according to the belt-routing diagram located under the hood.
Reconnect the negative cable to the battery using the battery terminal wrench. Start the engine and verify that the alternator works.
3,232 views
Usually answered in minutes!
2009 pontiac vibe belt diagram
2009 pontiac vibe belt diagram
×