2007 Subaru B9 Tribeca Logo

Related Topics:

A
Anonymous Posted on Dec 23, 2012

Error code 55 on 2007 tribeca

Er 55 on dash with abs light and traction control lights staying on now

5 Related Answers

Anonymous

  • 15 Answers
  • Posted on Jan 08, 2009

SOURCE: abs light on, cruise control and engine light 2007 subaru outback

55 EGR Temperature Sensor or Circuit

ABS light is nothing to do with code 55 separate fault circuits.

Under dash there are two wires with mini spades at the end, connect one of them to the single black multiplug in position 2. Thats RHS plug inlet when you hold plug with tab lock on top.
ABS sensor should then flash up error coded. Ignore code 11 thats a initial flash to let you nknow the difference between a fast and slow flash.

Let me know what code flashes up and I will tell you the symptom,

Dan

Ad

Anonymous

  • 382 Answers
  • Posted on Jul 29, 2009

SOURCE: radio lights

Try to adjust dash lights brighter. FOr some reason the radio blacks out even when the lights are dimmed a bit. Try turning the dash lights a bit brighter and see if you can see the radio. HAve a great day.

Anonymous

  • 2 Answers
  • Posted on Feb 28, 2010

SOURCE: check engine light, cruis control light flashes,

I HAD THIS SAME PROBLEM BACK IN AUGUST. GO GET YOU TIMING CHECKED I DID NOT AND I BLEW MY ENGINE. SUBARU TOLD ME I "OIL STARVED" THE ENGINE AND DID NOT HONOR THE WARRANTY FROM WHAT I HAVE SEEN ON THE WEB THIS HAS HAPPENED ON MORE THEN ONE OCCASION. LONG STORY SHORT I GOT THE CHICKEN AND EGG STORY WHAT HAPPENED FIRST TIMING WHEEL BREAKING AND CLOGGING THE OIL OR OIL NOT RUNNING PROPER AND THE TIMING WHEEL BREAKING. NOW I HAVE A CAR SITTING IN MY DRIVEWAY WAITING FOR A TEN THOUSAND YES TEN THOUSAND DOLLAR ENGINE. AND THREE MORE YEARS OF PAYMENTS

Anonymous

  • 2 Answers
  • Posted on Feb 28, 2010

SOURCE: what to do when My 2006 b9 Tribeca has 3 lights

Go get you timing checked I had the same problem in August and my timing wheel broke oil starved the engine and it blew. These are the only lights that came on nothing else. I am now stuck paying $10,000 for a new engine Subaru refused to honor the warranty I only had 34,000 miles on it at the time.

Anonymous

  • 27 Answers
  • Posted on Feb 28, 2011

SOURCE: 2009 subaru impreza 2.5i will

There is something wrong with your transmission (and most likely your ABS and TCS). You'll need to have the trouble codes read and diagnosed.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Abslight stays on. How to fix? This is a2007trailblazer?

First you need to have EBCM - electronic brake control module check for DTC'S - diagnostic trouble code's . If the light is on there is a code stored . I think most part stores can do this and for free . After you find out what code is stored , looking up that code in service repair information for diagnostic trouble shooting chart would be next step . There are a few codes too.
DTC C0035 or C0040
DTC C0045 or C0050
DTC C0110
DTC C0131
DTC C0161
DTC C0186
DTC C0196
DTC C0201
DTC C0240
DTC C0241 or P0856
DTC C0244 or P1689
DTC C0245
DTC C0283
DTC C0287
DTC C0290 or C0292
DTC C0455
DTC C0550
DTC C0558

Find the code do the diagnostic's , fix the problem , wiring issue's , a sensor , bad module ,what ever it is . The light will go out then . Here is a sample of code discription .
• DTC C0035 Left Front Wheel Speed Sensor Circuit
• DTC C0040 Right Front Wheel Speed Sensor Circuit
1helpful
1answer

I have a 06 subaru tribeca b9 the abs and the traction control lights are on and an er55. I replaced the wheel sencer and the lights are still on

My sensor light stayed on and my mechanic found where the wires that hooked together for the sensors were corroded and not making contact. He pulled them apart and cleaned them and now every thing works. and lights out. Hope this helps.
0helpful
1answer

Why does my ABS light stays on and sometimes i get a vibration in the brake petal causing my 2002 Cadillac escalade not wanting to stop?

The light being on means the system has detected a problem in one or more sensors. The vibration is the ABS modulating the brakes to prevent skidding because it has detected a wheel that is locked up. That wheel is most likely the one sensor that is giving you the error.
0helpful
1answer

Why does the traction control light turn on and stay on when I start the engine?

traction control and abs units both use the same wheel sensors
check for problem wires
run the fault codes to check for other areas and faults.
0helpful
1answer

Holden epica electronic stability program light appears on dash were a re the sensors and likely problems that would cause the dash light error code to comeon please

Traction control is with the wheel sensors. A bad sensor, bad bearing, or bad wiring. ABS is also controlled by these. Code readers don't read ABS and Traction control. Get the vehicle on a scanner....
2helpful
1answer

Why would engine light,cruise control and abs light come on?

hello,do post your DTC'S,(diagnostic trouble codes) and may be i can help.many modern vehicles spring up a multitude of warning icon's on the dashboard,much to the alarm of it's owner,however,often it can be as simple as a dirty wheel speed sensor,which fails to provide the necessary information to the main (ABS/TRACTION control unit) and so then will inhibit the cruise control,as naturally it's unable to ascertain road wheel speed,and also throw up the engine management light,as the braking/traction control systems unable to supply correct information to the main engine computer(ECU,OR PCM) electronic control unit/power control module. hope this helps,but please supply any further information that you can,regarding your DTC'S, that are read out,try to get a full print off,if at all possible, cheers.
0helpful
2answers

Cruise control light flashing, check engine light and traction light staying on??

It could be your abs sensor that is messing up with your traction control system and the cruise control I hope that helps
0helpful
1answer

My clutch won't go down and won't go into any

ABS light coming on,For this get the Engine computer scanned.It can be error codes stored in computer.------------
For more details regarding this click the link below:-----
The ABS and Traction Control Lights stays ON dash of car? http://schematicsdiagram.blogspot.com/2011/06/abs-and-traction-control-lights-stays.html

---------------
And now for clutch not going in gears it can be faulty clutch issue or problem with clutch cable.This has to be inspected.For more detailed instructions regarding Peugeot clutch problem,click the link below:-----
Peugeot 307: Clutch will no go in gears?
http://whoisbyme.blogspot.in/2012/05/peugeot-307-clutch-will-no-go-in-gears.html

---------
This will help.
Thanks.
1helpful
2answers

Vcs light and traction of light on

For this VCS and traction lights coming ON,its advisable to check/click this help links :----
VCS maintenance required ? http://howtobyme.blogspot.com/2011/11/vcs-maintaince-required-on-toyota-camry.html------- VCS and ABS lights go on and off intermittently? http://howtobyme.blogspot.com/2011/11/vcs-and-abs-lights-go-on-and-off.html
--------Traction control message? http://schematicsdiagram.blogspot.com/2012/01/traction-control-message.html
---------The ABS and Traction Control Lights stays ON dash of car? http://schematicsdiagram.blogspot.com/2011/06/abs-and-traction-control-lights-stays.html
----------This will help.Thanks.
6helpful
1answer

ABS LIGHT AND TRACTION CONTROL LIGHT ON DASH

make sure u didnt break a wire, there are sensors on the brakes, make sure theyre plugged in
Not finding what you are looking for?

3,240 views

Ask a Question

Usually answered in minutes!

Top Subaru Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Oliver Street

Level 2 Expert

73 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...