Instructions for replacing passenger side power mirror on 2007 xterra

Replace Your Car Passenger Side Mirror - How To - DIY ...

? 3:46
https://www.youtube.com/watch?v=77lBQ_CRqdo
Apr 10, 2012 - Uploaded by GregHint
See how even a novice can repair a passenger mirror on a FordEscape. ... Replace Your Car Passenger Side Mirror - How To - DIY .... Replace 2003-2008 Toyota Corolla Side Mirror, How to Change Install 2004 2005 2006
About 22,000 results (0.61 seconds) Search ResultsHow-To: Replace Ford Fusion side mirror (HD) - YouTube? 7:27https://www.youtube.com/watch?v=iGHeXUbvvJsMay 7, 2014 - Uploaded by Derrick HardingFord Fusion SEL 3.0 Liter V6 How to fix broken side mirrorIncludes: ... Published on May 7, 2014 ..... Great instructions - just replaced the driver's side mirror on my 2007 Fusion following your instructions. ... Front brake pad replacement 2006 - 2012 Ford Fusion Lincoln Mazda Pads Rotor Install Remove ...

Beings as everything that stopped working is on the passenger side, I'd think some wiring got disconnected or broken.

Clean both the bases and use silicone to stick the glass to the base and tape it for few hours and you will be fine.

You can access the inside mounting bolts by removing the panel just inside of the passenger mirror...the electric plug can be unplugged without any other changes...Your mirror is of course available through your local Ford dealer...you can also try the internet to find a like new replacement mirror and head assembly...just type in 2007 Explorer passenger side mirror...Also, your least costly replacement is available at your local salvage yard...some allow you to browse, and remove yourself...(good practise before scratching yours...some yards will pull the mirror for you...you might even find the exact color...salvage yard mirror heads (electric) go for $25. to $75. Sounds like you have a good start...Hope this helps.

Remove Old Mirror
1. 1 Open the side door to the Chrysler Town & Country, and find thescrew that holds the side mirror molding in place.
   
2. 
   Take the screw out and remove the molding panel that attached around the outside of the power mirror.
   
3. 
   Remove the bolts connecting the mirror to the door assembly. If equipped, unplug the power side view mirror wiring harness connector.
   
4. 
   Unplug the electric connectors, and pull the mirror out of the molding.
   

To remove mirror pry off inside triangle panel(black) which exposes 3 nuts which are removed with socket wrench. Detach wire harness and pull out mirror assembly. To replace insert new mirror screws thru assigned holes and reconnect wire harness and tighten nuts to snug. Push inside triangle panel back into place and you're done! It's that easy.

no the door pannel does not need to come off but there is a triangle shaped plastic trim pannel above the door pannel that needs to be removed to access the mounting bolts.

There is a Technical Service Bulletin on the power mirror actuator for replacement. If your mirror just stopped operating, I would take it back to the dealer and they will fix at no charge due to the TSB.

For removing the door panel

1. Remove window crank handle or power window switch assembly (if equipped).

• Disconnect harness connectors.

1. Remove pull handle escutcheon.
2. Remove pull handle cover and remove screw.
3. Lift armrest upward to release clips and remove armrest.

• Remove front door finisher screws behind armrest.

1. Release clips and remove front door finisher.

• Disconnect lock cable and handle cable from inside door handle assembly.

go to nissan web site.

take your door panel off slowly and unplug your mirror from inside the door