Question about 1991 Oldsmobile Ninety Eight Regency

1 Answer

1990 oldsmobile regnecy 98

Fuel injectors wont get hot

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 3,113 Answers

They are not supposed to!

Posted on Apr 07, 2010


1 Suggested Answer

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1990 cutlass ciera 3.3injectors are not pulsing injectors ohm out 11.8-12 40lb of fuel pressure wiring to injectors are hot at a loss can the M.A.F.cause a no start it does start with starting fluid

MAF is probably not the problem - sounds like the engine is not getting the fuel it needs to start and either your injectors are fouled or the pressure regulator is stuck - that might cause the hot wires. The fuel pressure seems a bit low, but it should momentarily drop when trying to start the engine.

Mar 09, 2017 | 1990 Oldsmobile Cutlass Ciera

1 Answer

1990 oldsmobile wont start

Chances are its an ignition problem if nothing happened by using starting fluid. Have you pulled the plug wires and checked for spark ?

Feb 17, 2014 | 1990 Oldsmobile Cutlass Ciera

1 Answer

1990 olds 98 suddenly dies. starter spray into inj. cover starts it but then immediately dies again. fuel pump and cannister filter ok. new module filter off inj. line under hood. still won't start. w

You cant check fuel pressure that way. You have to connect a fuel pressure guage to the fuel rail at the schrader valve. It should have 30-40psi when ignition is turned on. Injectors not functioning properly will cause a misfire Sounds like a fuel pump or fuel going out.

Jan 01, 2014 | 1990 Oldsmobile Ninety Eight

1 Answer

Car dies when it heats up

if it stahls when it hot and while ur slowing or putting it in gear i suspect the transmission torque control solenoid whicjh unplug the harness from the transmission ull be fine other wise u might have faulty fuel injectors

Sep 07, 2011 | 1990 Oldsmobile Cutlass Calais

2 Answers

Does 1990 Oldsmobile Regency have a ccold start injector?

no this engine doesn't use a cold start injector, only early fuel injection systems (Bosch K jetronic) used this part, this is a "L" jetronic system.

Mar 03, 2010 | 1990 Oldsmobile Regency

1 Answer

How to change fuel injector in 98 bravada

You need to relieve the fuel pressure, Gain access to the fuel rail, should be 4 or 5 bolts holding the fuel rail on... once you accessed and removed the fasteners, carefully pull up on the railon aboth sides.. a little wd may help release the injector seals, and you definitely wanna replace the lower o-rings... be careful liining the injectors up when u install the rail

Sep 14, 2009 | 1998 Oldsmobile Bravada

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

Jonah Oneal

Level 3 Expert

14092 Answers


Level 3 Expert

85178 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides