The window wiper spray on both my front and back windows are not working Will it be a fuse or does the unit need replaced The windscreen wipers are still working ok Can you also tell me where to locate the fuse box for this Thanks.
If you can hear the washer motor running, then the spray outputs are probably clogged. Use a sewing needle to clear the spray holes in the hood top sprayers.
I have done that a few times on my car.
Hope this helps.
It could be the fuse or the plug to the motors has come off. fuse is in the fuse box wiring is under the font bumper attached to the bottom metal part.
SOURCE: Renault Megane H/Back - 1999
HI
Well im a girl and know nothing about cars and just had a nightmare with my wipers. Went to 3 garages yesterday who checked the motor and fuses and they were fine. They all said it was the wiper relay which I have had to order from Benfield motors-they are now selling the parts for renault...they didnt have a clue to be honest! The lads in Kwik Fit have been amazing and very helpful! Hope this helps. I am waiting for my relay to be delivered...so fingers crossed!!
SOURCE: fuse for wipers on a mercedes c200k where are they situated
Fuse box under the bonnet its the 40amp fuse at the back about 4th from the right.
SOURCE: 2003 trailblazer rear wiper not spraying
I had this problem too, you have to take the back hatch panel off and reconect the hoses. the hoses are about as big as a drinking straw. it's not hard, but is time consuming.
SOURCE: My front windscreen wipers on my BMW mini are not
i repaired mine in about an hour , the motor contactor will be burnt out , this can be rapaired easily by soldering , the motor can be removed fairly easily without all the uneseccery strip down as many people think , if you would like the strip dwon procedure let me know
SOURCE: wiper fuse blows as soon as you insert one
start at the wiper motor harness and follow it back( even if wrapped up with other wires) you are simply goin to check carefully along harness and check it hasn't rubbed through and it's making contact with steel, with go through firewall at some point, that is a good spot for rubbing, but check it all carefully.
282 views
Usually answered in minutes!
×