04 escape has code 354,356,300,316 - 2004 Ford Escape

Question edited for clarity and spelling.
Question moved to category.

There is only on on the Catalytic Converter. The banks are shown here.

https://www.fordforumsonline.com/threads/04-v6-escape-o2-sensor-heater-question.13690/

..

You need a mechanic with a high level scan tool to check the Diagnostic Trouble Codes and Live Data. It is probably ABS Sensor related, but should never leave you with no brakes..

What engine ? 3.0 l - has one . 2.0 l - has one

You most likely have a problem with the emission control system on your car which a few components between the gas tank and exhaust manifold. The code you are getting is P0452 which is "Evap Emission Control System Pressure Sensor Low Input". Go to this link for a better description: https://edgeproducts.com/app/uploads/2014/08/customer_support_article-pdf-41.pdf

No,they are not inter changeable.

first find out what the code is for. call autozone and tell them to look up the code and they will be able to give you a list of possiable causes, then go on and make your decision as to what you are going to do to fix the problem

Follow your coil wires back to the connectors for the ECM the wire could be corroded from cutting insulation to check previously or the coils connector check for continuity of the wires all the way back to the ecm

YOU COULD HAVE FAULTY IGNITION COIL OR FUEL INJECTORS STOPPED UP.

you probably have a plugged catalytic converter. there are 3 cats on a ford escape.

check selonoid on box