Need timing belt marks diagram for mazda 323 160i , 2001 model, zm engine

Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.

Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.

i hope this helps

1. Remove the timing belt.
   

   Crankshaft and camshaft timing marks-2.4L engine
   

   Timing belt tensioner-2.4L engine
   

   Camshaft sprocket alignment-2.4L engine
   

   Timing belt installation-2.4L engine
   

   Timing belt tension adjustment-2.4L engine
   

   Timing belt tension verification-2.4L engine
   
   

Click on the following free, direct Link. It has two sets of Diagrams including the Timing + Marks: Belt Diagrams for your 2001 Volkswagon Bettle 2.0L SOHC 4-Cylinder. The other set of Diagrams is for the 1.8L DOHC 4-Cylinder. Further it has Instructional and Directional Diagrams that will help you out.

Let me know if this helped....

http://www.2carpros.com/car_repair_information/year/2001/make/volkswagen/model/new_beetle/2001_volkswagen_new_beetle_timing_belt_diagram_marks.htm

Click on the following direct Link. It has the Belts and Instructions Diagrams for your specific engine options (AC/No AC, etc.).

Let me know if this helped....

http://www.2carpros.com/car_repair_information/year/2001/make/acura/model/3.2cl/2001_acura_3.2cl_drive_belt_routing_diagram.htm

Click on the following direct Link. It has the Tining Belt Diagrams that will match your specific engine. Included are instructions and directions.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2001/make/mazda/model/protege/2001_mazda_protege_timing_belt_diagram_marks.htm

1.6L (Zm) Engine Refer to the illustration for component location.

1. Loosen mounting bolts A, B and C.
   
2. Loosen the adjusting bolt D and remove the belt.
   

To install:

1. Installation is the reverse of removal.
   
2. Tighten mounting bolts A, B and C.
   

Location of the alternator mounting bolts and adjuster bolt D–Protégé 1.6L (ZM) engine


2.0L (Fs) Engine Refer to the illustration for component location.

1. Loosen mounting bolt A and B.
   
2. Loosen the adjusting bolt C and remove the belt.
   

To install:

1. Installation is the reverse of removal.
   
2. Adjust the belt deflection or tension by turning the adjusting bolt C.
   
3. Tighten mounting bolt A and B.
   

Alternator belt tension adjuster bolt (C)–Protégé 2.0 L (FS) engine

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK on the following LINK. It has the Timing Belt and Mark(s) Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/1998/make/mazda/model/b2500/1998_mazda_b2500_timing_belt_diagram_marks.htm

how do i get the timing back where it belongs on my 2006 chrysler 300 i messed with it before i realized it had marks