Question about Cars & Trucks
After warms up it seems fine
Its cold start issues:---- Cold start problem and vehicle shudder around 2500 to
3500 rpms ----------
Go through the list of help links mentioned below:----
Click the link :----
Low idle when cold out side?
Ford explorer 4.0 will not idle when cold?
Automatic transmission shift lever hard to move on cold
Car won't start when cold?
These will help.
Cold start problem and vehicle shudder around 2500 to
Posted on Nov 28, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
icp sensor, definitly. you can get to it but you have to go from the bottom. remove the trans filler tube, and lower the the trans slightly, then you can remove the turbo heat shield and get to the sensor, you will need a 1 1/16" 12 point crows foot socket for the sensor its self.
Posted on Apr 03, 2009
if it runs high when you first start it then mellows out,, theirs no problem , all of our chevys do that.... but if its sputtering or you hear a quiet popping noise check spark plugs
Posted on May 20, 2009
SOURCE: Nissan Altima Fluctuates Idle
SOUND LIKE THE ECM IS HUNTING FOR THE IDLE LOOK FOR A VACUME LEAK IN OR AROUND INTAKE MANIFOLD , ITS KINDA TRICKY BUT A CAN OF CARB SPRAY CAREFULLY AROUND YTHE AREA CAN PINPOINT THE LEAK BUT GET A HELPER WITH A FIRE EXT TO HELP JUST IN CASE IF IT DOSNT REV UP WHEN YOU SPRAY THE LEAK AREA THEN YOUV GOT TO GET IT ON A SCANNER TO CHECK IT OUT WE USALLLY CHARGE ,5 HRS TO DO THIS SO ITS NOT REAL EXPENSIVE GOOD LUCK
Posted on Aug 24, 2009
Tips for a great answer:
Oct 12, 2014 | Cars & Trucks
Jan 23, 2018 | 1993 Lexus Es 300
Engine stalls or RPM
fluctuates at idle up and down or dies near idle.
This problem is commonly caused by a dirty automatic idle speed control valve and throttle valve but always run a OBD2 fault code as well as the cleaning procedure. Buy a can of throttle valve cleaner (do not use carburetor spray cleaner!) from NAPA or Carquest (made by CRC chemicals) and spray it into the air intake while the engine is running, use up about 1/2 the can, engine will try to stall hold the speed up, shut it down and let it soak for 30 minutes, restart and blow out the remaining fluid, shut it down and disconnect the negative battery cable for 5 Min's to reset the base idle control
Oct 15, 2012 | 1996 Mercedes-Benz C-Class
Sep 09, 2010 | 1998 Honda Accord
Aug 09, 2009 | 2003 BMW 325
Jul 08, 2009 | 1997 Pontiac Bonneville
Mar 27, 2009 | 1995 Toyota Camry
Nov 12, 2008 | 1994 Pontiac Bonneville
368 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: