What does yellow spanner sign displayed on dashbaord of honda 2007 indicate?

I found this, but you need a basic socket set, or a set of ring spanners.

It is a 6mm bolt with a 10mm head.

https://www.google.com/search?q=+2007+Honda+Civic+bolt+size+on+the+thermostat+housing

..

The spanner light is a marker light. It tells you the car is due it's annual service.

The yellow spanner light indicates a service is due

dash warning, seems to me that is CEL"? check engine light
the spanner should be obvious. (fix me) and scan it after checking all fuses?
its under warranty, (up to 8 years on smog) why not ask THEM.

i have not found any solution kindly send me the solution plz

{: ) The two triangles you saw is for the StabilTtrak system,, sometimes called the traction control indicator. When you see a spanner beside it, it means the system needs servicing.
StabiliTrak will turn off automatically if a problem is detected in the system. For vehicles without a DIC, the StabiliTrak light and the StabiliTrak service light will both come on. If the StabiliTrak service light does not clear itself after restarting the vehicle, you should see your dealer for service.

Hello, being a 2009 model, it should be still under warranty, it sounds like its due for a periodic service but check with your dealer.

I just checked on that one, they said to disconnect the battery for 5 minutes, and the lights will reset? I have heard this but never had to try it. Your spanner is scheduled maint and the oil light you know. And they both should be resettable. Hope this helps.

The spanner or wrench you are seeing indicates how many miles are remaining before your vehicle is supposed to have the oil changed. Normally this is about a 10,000 mile interval and may be reset after an oil change by following this procedure...



Do the following steps:
Move start switch to position "2".
Within the first 4 seconds after moving the start switch to position 2, press the reset button for the trip counter twice within one second. The display for the service request is activated for about 10 seconds.
Within these 10 seconds, move the start switch into position "0". The service request continues to be displayed.
Press the reset button for trip counter and keep it pressed.
Move the start switch into position "2".
Continue to hold the reset button for the trip counter pressed until the signal sounds and the new start distance appears in the display (it takes about 10 seconds).