Changed all the Intake gaskets now I have a coolent leak

codes are OBDll and are available online free
P0174

• Intake air leaks
• Faulty front heated oxygen sensor
• Ignition misfiring
• Faulty fuel injectors
• Exhaust gas leaks
• Incorrect fuel pressure
• Lack of fuel
• Faulty Mass Air Flow (MAF) sensor
• Incorrect Positive Crankcase Ventilation (PCV) hose connection
• P0171
• Intake air leaks
• Faulty front heated oxygen sensor
• Ignition misfiring
• Faulty fuel injectors
• Exhaust gas leaks
• Incorrect fuel pressure
• Lack of fuel
• Faulty Mass Air Flow (MAF) sensor
• Incorrect Positive Crankcase Ventilation (PCV) hose connection
• P0102
• copy and paste
• https://www.justanswer.com/ford/2dnqt-98-windstar-dtc-p0102-sitting-trouble-code-mil.html

copy and paste
https://www.justanswer.com/ford/8kg47-ford-windstar-code-p0302-p0305.html

P0453
copy and paste
https://www.justanswer.com/ford/3qxa3-getting-po453-code-evap-pres-sensor-high-99-windstar.html

were you sure to set the gap on the plugs? and replace them with the correct plug for that matter? also...why was the thermostat replaced?

Error Code: P0303
Description:
Cylinder 3 - Misfire Detected
Possible Cause:
Wiring harness, igniter and fuel injector connectors.
Ignition system. (Spark plugs gaps)
Fuel injector No. 3.
Fuel pressure.
Running out of fuel.
EVAP canister purge valve.
Evaporative emission system.
Low compression, cylinder No.3. (check valve clearance and throttle plate for excessive wear)
Engine control module (ECM).

head gasket blown or warped heador cracked head on engine

P0301 Cylinder No. 1 Misfire Detected
P0302 Cylinder No. 2 Misfire Detected
P0303 Cylinder No. 3 Misfire Detected
P0304 Cylinder No. 4 Misfire Detected
P0305 Cylinder No. 5 Misfire Detected
P0306 Cylinder No. 6 Misfire Detected
P1346 Variable Valve Timing (VVT) Circuit Range/Performance Fault
P1349 Variable Valve Timing (VVT) System Malfunction
P0330 Knock Sensor
P0446 EVAP Vent Control Fault
P0430 Catalyst System

Stop driving immediately.....

You defiantly skipped on your timing........

What year and model? What engine size?

misfire on cyl.s 3 ,4 , 5 ,and 7
most common cause spark plug boots
and plugs.

next most common ,, intake manifold gasket

sounds like an intake leak or a vacuum leak , would start it and spray like carb cleaner or starting fluid on the top of the motor while it is cool not hot and see if you get a rise or fall in rpm,s if it does get a response chase down the vacuum leak, if not it is probally the intake gasket

There's a number of other things it could be. Faulty O2 sensor(s), faulty fuel injector(s), failed catalytic converter, poor compression, etc. These articles ought to help - P0303 - P0305 - P0306

p0456: evap system. sensor failure
p0172: evap system. intake blocked
p0778: exaust valve control. solenoid/ecu faukt
p0300: cylinders misfire. check ht/ignition leads
p0301,303,304,305,306: same ht leads

hope this helps..