Hi, do you have the firing order on a 1989 Dodge D50 2.0L 5 speed

All the diagrams I see for the 3.9 show the same. However, some show a 60 degree advance in orientation of the cap, i.e. the number 1 position is at number 2. Try moving the wires counter clockwise one position.

If you began with a non running engine, I suggest you manually bar over the crankshaft until cylinder 1 is at TDC of the compression stroke. Then remove the distributor cap. The rotor should be pointing directly at distributor tower number 1 position.

My info says the firing order is 123456.

Hi...here you go! Please rate my answer...thanks!

Firing order 1-5-4-2-6-3-7-8

For the 1988 thru 1996 Dodge 3.9L (238 cubic inch) V6:

Firing Order:
1 - 6 - 5 - 4 - 3 - 2

Cylinders:
........(back).......
|..6..|........|..5..|
|..4..|........|..3..|
|..2..|........|..1..|
........(front)

Distributor:
...................[.] clip
..........5
..6
........................4
1
.....................3
...........2
[.]-clip

If your truck is a 4cyl. it is 1, 3, 4, 2 and if it is a V6 then it is 1, 6, 5, 4, 3, 2. Hope this helps.

1 3 4 2 is the correct firing order

Cylinder order in motor:

firewall
4 3 2 1
radiator

I do not know if you have the 2.5L SOHC, or 2.5L TURBO, or 3.0L V6 Engine; however I have included all of them below.

For the 2.5L SOHC AND 2.5L SOHC TURBO:
Firing Order:
1-3-4-2
Cylinders:
.....(back)
1....2....3.....4
.....(front)
Distributor:
......(back)
......1.....3
(+)............(+)-screws
......2.....4
......(front)
Rotation: Clockwise.

For the 3.0L V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
....(back)
1......3......5
2......4......6
.....(front)
Distributor:
.....(back)
(+).2...1
3...........6
.....4...5..(+)-screws
.....(front)
Rotation: Counterclockwise

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

For all Dodge V8 truck engines, the firing order is 1-8-4-3-6-5-7-2. For all Dodge V6 truck engines, the firing order is 1-6-5-4-3-2. For Dodge inline 6 cylinder engines, the firing order is For all Dodge 4 cylinder engines, the firing order is 1-3-4-2 All dodge distributors rotate clockwise.


look at your distributor cap while standing on the driver's side of the vehicle.
Start at number 1, which is labelled on the cap, and go
clockwise

Good Luck

Firing order is 1-2-3-4-5-6
Go to link for cylinder layout picture
http://autorepair.about.com/library/firing_orders/bl-fo-10422.htm

The firing order is 1-6-5-4-3-2 in a clockwise direction. Number 1 should be marked on the cap. 1 3 5 are on the driver side, 2 4 6 on the passenger side. I hope this helps.