Hi i have a 1996 chevy tahoe and i need some help with it. I had a problem where the truck was stuck in 4 wheel drive. So i replaced the transfer case and now the truck is stuck in neutral. While the old transfer case was off, i put the car in neutral to take the dash off to replace a switch. Do you think when i shifted it into neutral when the transfer case and everything was off that it could mess it up? Or is their some other problem? The transfer case i got was from a local dismantler. When i switch the car to 4 wheel drive you can hear the electronic switch engage. but the car just rolls. Throughout every gear no matter what i do the car is in neutral. I hope you can help me. thanks
Transfer case
2,281 views
Usually answered in minutes!
Someone said to check fuse panel. I did all looked good. Another suggestion was to check switches, did'nt understand term, except for plug- ins. Now that the unit is in, those seem pretty hard to acess for testing. With these dismantler parts you don't know always what you are getting, I guess! Now I will pull it out again, should go easier with practice from the first re-install.
Since I am trying over again if you have any advice what to look out for before I drop it in, I'd appreciate it.
Thanks Again, Have a good day....
stuck in neutral
when i am driving down the road my 4wd shifter wants to go into neutral how do i fix the problem
×