Timing belt broke now engine is missing
Have you change the spark plugs . you may have a bent vavle
SOURCE: 1999 toyota camry
Take it to autozone and have them to pull a code on it.It sounds like O-2 sincer
SOURCE: Replacement of timing belt for 2004 Hyundai Elantra
Just the belt if that is all you need. I would replace all the other belts as well. The Water pump pully has to come offYou can visual the pump better at that time. The easiest way to get the pully back on and off is to remove the Power steering resevoir and transaxell mount in fron middle. Jack the engine up as high as you can get it. Put a block under the pan when jacking to spread the push force. this will tilt it back and up so the pulley will stay ion the water pump nub. It is a two piece pully.
SOURCE: How to replace serpentine belts 99' Hyundai Elantra.
you might need to get a prybar or something such long, and try to pry it off the belt, it should go easy right away. It is a spring-inside assembly, and won't brake. There also could be a 3/4 hole in it, look from a side. It's for middle size ratched, it can be used to loosen the tensioner from serp. belt.
SOURCE: How do I replace the spark plugs on 2003 Hyundai elantra?
Go to www.hmaservice.com and register (veh by VIN). You'll then have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.
SOURCE: 2001 hyundai elantra idling high
weeeeiiirrdddd. i have a 2001 hyundia elentra gls, and my third cylinder is misfiring as well. my car also revs constantly on idle and in between shifting. it will flutter between 2-3000 or it will just stay at 5000. i replaced my plugs and wires to no fix with my cylinder. autozone also told me that it sounds like my throttle position sensor needs replaced, but every part they try to sell me will not fit and they swear up and down this is the right part...
111 views
Usually answered in minutes!
×