Torque specs head bolts. cam hold down bolts.
SOURCE: 87 samurai bolt torque specs for engine
The haynes book is not recommended since there are numerous mistakes and they still will not update. One of the biggest is the firing order.
The factory service manual is the only way to go.
Head bolts - 46 - 50.5 lbs (there is an order sequence for the bolts)
Intake & exhuast manifolds- 13.5 - 20 lbs
Flywheel - 41.5 - 47 lbs
Clutch cover - 13.5 - 20 lbs
SOURCE: i need torqe specs for
Check out this link for your answers:
http://www.autozone.com/autozone/repairguides/Suzuki-Vitara-Grand-Vitara-XL7-2000-06/Specifications/Torque-Specifications/_/P-0996b43f8037c5e2
SOURCE: I need the Head bolt
head torque specs for 2004 suzuki forenza are 18ft IBS then 90 degrees in sequence 3X
The ac compressor bracket bolts are to be torqued to 40 ft lbs, as far as the compressor itself you can just hand tighten bolts, there is no specs for compressor bolts just bracket, the bolts are just snug.
3,886 views
Usually answered in minutes!
×