2007 saturn sky. Brake lights will not come on. Fuse ok. Blinkers ok

Fuse, bulb, switch, or wiring is bad.

check and test brake light switch didnt specify vehicle most switches located under dash on bracket of brake pedal

Light gets power from brake light switch/.May be switch got shorted an brake light getting non-stop power causing it not to turn OFF brake light.

Get the brake light switch checked. Check volt at brake light switch.

It can be faulty brake light switch causing the problem or its wiring short for switch.

==========

To trouble shoot brake related problem, check the help links mentioned below:-----

Click the link:----

1996 Buick Regal Grand Sport Brake light Switch Location?

http://schematicsdiagram.blogspot.in/2012/04/1996-buick-regal-gran-sport-brake-light.html

-----------

No brake lights on Buick?

http://schematicsdiagram.blogspot.in/2012/04/no-brake-lights-on-buick.html

----------

Brake lights not working on 1989 BUICK REGAL?

http://schematicsdiagram.blogspot.in/2012/04/brake-lights-not-working-on-1989-buick.html

-------

How to replace Brake light switch on Chevrolet Tahoe?

http://technoanswers.blogspot.in/2012/02/how-to-replace-brake-light-switch-on.html

---------------

How to replace Parking, turn, and Brake Lights on car?

http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-parking-turn-and-brake.html

----------

Upper brake lights work, but low brake light not working?

http://schematicsdiagram.blogspot.com/2011/12/upper-brake-lights-workbut-low.html

------------

1997 Cadillac Catera: How to replace Brake Light Switch?

http://howtobyme.blogspot.in/2012/06/1997-cadillac-catera-how-to-replace.html

------------

1996 Chrysler LHS brake light circuit wiring diagram?

http://technoanswers.blogspot.in/2012/02/1996-chrysler-lhs-brake-light-circuit.html

----------

How to replace rear Brake lights on 2004 Toyota RAV4?

http://schematicsdiagram.blogspot.in/2012/02/how-to-replace-rear-brake-lights-on.html

------------

One brake light on driver side not working, but other lights work?

http://schematicsdiagram.blogspot.com/2011/12/one-brake-light-on-driver-side-not.html

----------

2002 Lincoln Town car Fuse Box

http://schematicsdiagram.blogspot.com/2012/11/2002-lincoln-town-car-fuse-box.html

2007 KIA Rio: Brake Light Fuse Box Diagram?

http://repairhelpcenter.blogspot.in/2012/06/2007-kia-rio-brake-light-fuse-box.html

-------------

Overhead Brake lights not working on 1999 GMC Sierra 4x4?

http://technoanswers.blogspot.in/2012/03/overhead-brake-lights-not-working-on.html

---------

Brake lights not working

http://schematicsdiagram.blogspot.com/2012/11/brake-lights-not-working.html

-------

2004 Ford Mustang: Brake light Fuse Location?

http://howtobyme.blogspot.in/2012/05/2004-ford-mustang-brake-light-fuse.html

---------

These will help.

Thanks.

most blinkers uses relays, and when they flashes fast one light is out, but you replaced your burnt bulb might be a bad relay.

The brake light switch, located on the brake padal assembly, is and input to the cruise control module. When the switch fails keeping the lights on is makes the cruise control module think you are applying the brakes when infact you are not. Chek the switch wiring for damage and if ok replace the switch making sure you adjust it properly.

if your fuse is good. and you have power at the brake light switch and when you hit the brakes you have power coming out the otherside of brake light switch/which would be the white wire/ check that the white wire is sending power up the turn signal switch. if theres power there and your turnsignals work? im afraid that your turnsignal switch is bad rare but it has been known to happen.

I had the same problem! I used a piece of wood to keep the break pedal depressed and then started to remove one of the break lamps and to my surprise it came on! Same thing on the other side. So I did not seat (bottom out) the lamps in their sockets and both break light are now working properly. I had a similar issue last spring but that time only one light was out. I put in a new bulb and it still did not work so I messed around with it a little more and it started working. Never did figure it out until now. Hope this helps!

Check the connection at the brake light switch for power comming out to the barke lights,try feeding power to the brake lights manualy using a jumper wire from your fuse box or battery,unplug the wire from the switch and put power to the harness if everything is OK the brake lights will work,then you need a new switch.

I have a 2001 Ford F150, my brake lights dont work. Ive replaced the bulbs, checked the fuses,and the brake switch on side of the brake pedal was replaced. I still dont have any brake lights. My third brake light works fine, along with my running lights,flashers, blinkers.