98 dodge 1500 stalls as soon as placed in reverse run rough in drive but dose not stall code scanner says open loop on fuel system is this a bad pcm

Also interior computer for mpg and dte not working only direction and outside temp here is code scanner report any help is appreciated VIN: 3B7HF12Z0WM240318 Report 104 Vehicle: 1998 Dodge Ram Pickup Date of Report: 10/29/2012 9:55:03 AM Engine: V8, 5.9L Mileage Reported: 100000 DTCs Engine/Transmission Engine/Transmission Diagnostic Trouble Code Information Close Details MIL DTC P0118Engine Coolant Temperature Sensor Circuit High Input Stored Codes P0118Engine Coolant Temperature Sensor Circuit High Input Freeze Frame Information Close Details Parameter Description Results DTC for which Freeze Frame was Stored P0118 Fuel System 1 Status Open Loop Fuel System 2 Status Not Supported Calculated LOAD Value 12.16 Engine Coolant Temp -40.00 Short Term Fuel Trim - Bank 1 0.00 Long Term Fuel Trim - Bank 1 0.00 Intake Manifold Absolute Pressure 11.84 inHg Engine RPM 1,344.00 rpm Vehicle Speed Sensor 0.00 mph Monitor Status Close Details Monitor Name Monitor Icon Status MIL (Check Engine Light) ON Misfire Monitoring Complete Fuel System Monitoring Complete Comprehensive Component Monitoring Complete Catalyst Monitoring Not complete Heated Catalyst Monitoring Not Supported Evaporative System Monitoring Not Supported NMHC Monitoring Not Supported NOxAdsorber Monitoring Not Supported Secondary Air System Monitoring Not Supported Oxygen Sensor Monitoring Not complete Oxygen Sensor Heater Monitoring Not complete EGR System Monitoring Not Supported Boost Pressure System Monitoring Not Supported Exhaust Gas Sensor Monitoring Not Supported PM Filter Monitoring Not Supported